Two questions, please, regarding the public presentation expected to occur after the third party tests:
A) Assuming the tests go as expected, very approximately, how long after completion of the tests would you expect the presentation to occur?
B) Are you planning to invite representatives from a few ‘serious’ news media organizations to the presentation? Or might you, instead, make them aware of the presentation so they can observe it over the internet along with everyone else?
Thank you for your extraordinary patience responding to everyone’s questions, and your extraordinary perseverence in your research efforts.
(1) Will your “presentation” of the SKL occur before or after the third-party tests in September.
(2) About how long do you anticipate the third=party tests lasting.
(3) If answer of #1 is ‘before’ will there be another presentation after to announce results.
(4) Will images of the SKL reactor, cooling system and controller be included in your presentation.
(5) Will the images of the SKL in operation be shown during the third-party tests.
(6) Do you have a date and/or location for the presentation and tests yet (and if so, what are they).
Dear AR,
Thank you for your inspiration and perspiration to get the Ecat to where it is now.
I know your inspiration will never stop, but the world needs the Ecat now!!!
Can you give us a timeline to a product?
Now for a technical question:
I came across Entropy in my engineering degree 55 years ago – in thermodynamics.
Entropy is the integral of dQ/T, where dQ is change of heat energy, and T is absolute temperature.
To reduce Entropy in the above equation, you must be either making heat flow from cold to hot (impossible) or reverse time.
Have you created a Time Machine?
regards,
GL
Manuel Cilia:
My basic text after the developments of the last 3 years is
“Maxwell-Dirac Theory and Occam’s Razor: Unified Field, Elementary Particles, and Nuclear Interactions”: you can find it googling the title, plus “Amazon”
There you will find also a rich bibliography of references.
Warm Regards,
A.R.
Dear Dr Rossi
I wish I could understand the theories behind the physic’s of what might happening deep down in the atom. My last look at Quantum physic was 40 years ago when I studied electrical engineering, could you recommended any books or videos for a good starting point for getting back into the nature of the type of physic that you are talking about as I am very interested but lacking in knowledge.
Physicist:
Yes, the electromagnetic four-potential [V * s * m^-1],[eV] is based on the hexadecimal system of the Clifford algebra, and the electromagnetic four potential defines the “zitterbewegung” of electrons.
Warm Regards,
A.R.
Christian SCHOLL:
These characteristics will be disclosed during the presentation.
The heat exchanger is an option that depends on specific situations.
Warm Regards,
A.R.
The design of the production Ecat has been started.
Can you give us the final dimension and the heat power?
Does this type of Ecat require a water, air or oil heat exchanger?
Warm Regards,
Dear Andrea,
In my reading of your theories about the mechanisms associated with your device, I understand that you depend on the formation of dense electron aggregates created by the plasma and controlled partly by a pulse of rf energy.
In my scientific experience, the most efficient method of creating free electrons is using Caesium in a plasma since the ionization potential of the Caesium is the lowest of the groups. When I used this method to enhance the production of infrared energy, the results were astonishing and the infrared energy output was easily controlled by pulses of kilocycle rf energy.
The plasma was contained in an alumina tube and created by ionizing energy inserted between tungsten electrodes in a hydrogen atmosphere containing a small amount of Caesium.
Successful regards.
In my last question you said that design of the production Ecat has been started. Can you tell us how far along is the design of this Ecat that will be mass produced.
a. less than 25% complete
b. more than 25% complete
c. more than 50% complete
d. more than 75% complete
I share the following YouTube video as a possible curious diversion because of its discussion of David Bohm, his description of the Implicate/Explicate domains, and his thesis that Consciousness is a fundamental factor of the Cosmos. Certainly, it is only tangential to your work on the SKL. However, it is interesting, in my view, as a one of many consequential theories rising out of the famous Delayed-Choice-Double-Slit experiment.
i’m not to worried about the western world, but do you think that the e-cat SKL would be affordable also for african communities (as many of them aren’t connected to the power grid)?
Dear Andrea,
I am happy to hear there is no conspiracy. However could you not rotate the crew one by one on vacation, including yourself, so as to have the development continue? This what was done on all projects I was involved with.
Efficient regards.
I hope you are enjoying your holiday! Regarding the upcoming presentation, what do you think about doing an online-only presentation with only essential participants in attendance with the E-Cat SKL. I think it could make it easier with so many restrictions and uncertainties in placed due to the coronavirus situation. With top quality video and audio, I don’t think the audience would miss too much.
Eernie1:
I think you are watching too many movies of James Bond during these Summer holidays ( I am laughing with you, not of you ). Leonardo Corporation has taken 2 weeks of holidays, as any concern does once a year, and the restrictions of Corona virus related to travels are what they are, are unavoidable and do not depend on us.
You are commenting the work of guys that are giving the maximum of themselves 10 years since for 10-15 hours a day, including weekends, 350 days per year.
Warm Regards,
A.R.
You have been very forthcoming to give us the energy output (electric & thermal) and dimensions of the SKL. Can you also provide the mass for Reactor, Cooling System and Controller? It would also be helpful to know how many reactors can be run by a single controller in order to allocate its mass properly.
Forgive me if you have already provided this information and I missed it.
Thanks for all your great work and enjoy your holidays – you have earned it!
Dear Andrea,
When you announced that work by you and your team on the latest version of your device that showed such promise was suspended because you were taking a vacation, I came to the following conclusion.
It was your collaborators(partners or customers) that asked you to slow the program for some reason.
Slowing or stopping progress on such an important project would be like asking that work would stop on the atomic bomb project during WW2 so that Oppenheim or Fermi could take a vacation.
I also feel that using the Covirus as an excuse is a ploy to delay the introduction of your device.
My advice, which is worth 2 cents, would be to do what you can to get the necessary disclosures to present your device for the public as soon as possible.
We are not getting younger.
Cautious regards
Dear Andrea,
Could the picometric electron aggregates be “seen”, for example by shooting some suitable particle beam (perhaps electron beam) into the matter and observing how it scatters? Everything in atomic scale and below is unobservable using optical means, but still we know a great deal of them. The knowledge usually comes from some scattering experiments. The scale is between nuclear and atomic, and both can be “seen” using scattering experiments, so perhaps also the picometric stuff.
Wondering regards, /pekka
Rodney Nicholson:
A) Shortly
B) Both
I am delighted to answer our Readers,
Warm Regards,
A.R.
Dear Andrea,
Two questions, please, regarding the public presentation expected to occur after the third party tests:
A) Assuming the tests go as expected, very approximately, how long after completion of the tests would you expect the presentation to occur?
B) Are you planning to invite representatives from a few ‘serious’ news media organizations to the presentation? Or might you, instead, make them aware of the presentation so they can observe it over the internet along with everyone else?
Thank you for your extraordinary patience responding to everyone’s questions, and your extraordinary perseverence in your research efforts.
Rodney Nicholson.
Greg Leonard:
I am afraid you forgot, after so much time, the concept of Entropy.
About a timeline for a product, it is premature.
Warm Regards,
A.R.
Bill Conley:
1 after
2 don’t know
3 n.a.
4 tbd
5 no
6 confidential
Warm Regards,
A.R.
Rod Walton:
Thank you for the update,
Warm Regards,
A.R.
Bernie Morrissey:
Both,
Warm Regards,
A.R.
Dear Andrea Rossi,
Can you tell us if the interested parties are looking to incorporate the Ecat SKL into their own products or just heat and electricity.
Bernie Morrissey
On Power Engineering issue of August 18 2020:
Gas fired and carbon free resources fueled close to 80% of US power in the first half of 2020
Rod Walton
Andrea,
A few questions if you will:
(1) Will your “presentation” of the SKL occur before or after the third-party tests in September.
(2) About how long do you anticipate the third=party tests lasting.
(3) If answer of #1 is ‘before’ will there be another presentation after to announce results.
(4) Will images of the SKL reactor, cooling system and controller be included in your presentation.
(5) Will the images of the SKL in operation be shown during the third-party tests.
(6) Do you have a date and/or location for the presentation and tests yet (and if so, what are they).
Thanks for any information you can provide.
Bill
Dear AR,
Thank you for your inspiration and perspiration to get the Ecat to where it is now.
I know your inspiration will never stop, but the world needs the Ecat now!!!
Can you give us a timeline to a product?
Now for a technical question:
I came across Entropy in my engineering degree 55 years ago – in thermodynamics.
Entropy is the integral of dQ/T, where dQ is change of heat energy, and T is absolute temperature.
To reduce Entropy in the above equation, you must be either making heat flow from cold to hot (impossible) or reverse time.
Have you created a Time Machine?
regards,
GL
Manuel Cilia:
My basic text after the developments of the last 3 years is
“Maxwell-Dirac Theory and Occam’s Razor: Unified Field, Elementary Particles, and Nuclear Interactions”: you can find it googling the title, plus “Amazon”
There you will find also a rich bibliography of references.
Warm Regards,
A.R.
Dear Dr Rossi
I wish I could understand the theories behind the physic’s of what might happening deep down in the atom. My last look at Quantum physic was 40 years ago when I studied electrical engineering, could you recommended any books or videos for a good starting point for getting back into the nature of the type of physic that you are talking about as I am very interested but lacking in knowledge.
Physicist:
Yes, the electromagnetic four-potential [V * s * m^-1],[eV] is based on the hexadecimal system of the Clifford algebra, and the electromagnetic four potential defines the “zitterbewegung” of electrons.
Warm Regards,
A.R.
Christian SCHOLL:
These characteristics will be disclosed during the presentation.
The heat exchanger is an option that depends on specific situations.
Warm Regards,
A.R.
Dear Dr Rossi,
the ref 12 of
http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
is strictly connected with the Clifford algebra: which is the link to the theoretical system of your paper ?
Thanks,
Physicist
Dear Andrea,
The design of the production Ecat has been started.
Can you give us the final dimension and the heat power?
Does this type of Ecat require a water, air or oil heat exchanger?
Warm Regards,
Christian
Tino:
Thank you for tthe link and for your kind sustain,
Warm Regards,
A.R.
Segnalo questo sito
http://www.spazionica.org
E un Saluto al nostro Grande Dr. Andrea Rossi
Eernie1:
Thank you for your insight,
Warm Regards,
A.R.
Dear Andrea,
In my reading of your theories about the mechanisms associated with your device, I understand that you depend on the formation of dense electron aggregates created by the plasma and controlled partly by a pulse of rf energy.
In my scientific experience, the most efficient method of creating free electrons is using Caesium in a plasma since the ionization potential of the Caesium is the lowest of the groups. When I used this method to enhance the production of infrared energy, the results were astonishing and the infrared energy output was easily controlled by pulses of kilocycle rf energy.
The plasma was contained in an alumina tube and created by ionizing energy inserted between tungsten electrodes in a hydrogen atmosphere containing a small amount of Caesium.
Successful regards.
Dear Readers:
Please go to
http://www.rossilivecat.com
to find comments published today in other posts of this blog,
Warm Regards,
A.R.
Andres Dillinger:
The electron is associated to a magnetic flux equal to h/e
See ref. 11, 12 on
http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
Warm Regards,
A.R.
Dear Dr Andrea Rossi,
which is the magnetic field of an electron ?
Mason:
Thank you for the link,
Warm Regards,
A.R.
MIKE PHALEN:
b.
Warm regards,
A.R.
Hi Dr. Rossi,
In my last question you said that design of the production Ecat has been started. Can you tell us how far along is the design of this Ecat that will be mass produced.
a. less than 25% complete
b. more than 25% complete
c. more than 50% complete
d. more than 75% complete
Dear Andrea,
I hope all is well during your vacation.
I share the following YouTube video as a possible curious diversion because of its discussion of David Bohm, his description of the Implicate/Explicate domains, and his thesis that Consciousness is a fundamental factor of the Cosmos. Certainly, it is only tangential to your work on the SKL. However, it is interesting, in my view, as a one of many consequential theories rising out of the famous Delayed-Choice-Double-Slit experiment.
My best to you, your wife, and Team Rossi.
Sincerely & Respectfully,
Mason
Link>> https://youtu.be/-tOTX7oI5Vs
Victor:
Yes.
Happy holidays to you too,
Warm Regards,
A.R.
Dear Dr. Andrea Rossi,
i’m not to worried about the western world, but do you think that the e-cat SKL would be affordable also for african communities (as many of them aren’t connected to the power grid)?
happy holidays
v : )
Eernie1:
Thank you for your suggestion, but in our specific case it is not applicable.
Warm Regards,
A.R.
Sam:
No
Warm Regards,
A.R.
Julia:
Thank you for your attention to our work,
Warm Regards,
A.R.
Dr Rossi,
the fig 1 “trends of Casimir, Coulomb and magnetic forces as a function of distance” on page 3 of
http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
is very important. Thank you for the publication !
All the best,
Julia
Hello DR Rossi
Does increased investing by
your partner depend on positive
Third Party Testing of your technology?
Regards
Sam
Dear Andrea,
I am happy to hear there is no conspiracy. However could you not rotate the crew one by one on vacation, including yourself, so as to have the development continue? This what was done on all projects I was involved with.
Efficient regards.
Frank Acland:
This can be a good idea, enough good to be thought about.
Warm Regards,
A.R.
Dear Andrea,
I hope you are enjoying your holiday! Regarding the upcoming presentation, what do you think about doing an online-only presentation with only essential participants in attendance with the E-Cat SKL. I think it could make it easier with so many restrictions and uncertainties in placed due to the coronavirus situation. With top quality video and audio, I don’t think the audience would miss too much.
Kind regards,
Frank Acland
Eernie1:
I think you are watching too many movies of James Bond during these Summer holidays ( I am laughing with you, not of you ). Leonardo Corporation has taken 2 weeks of holidays, as any concern does once a year, and the restrictions of Corona virus related to travels are what they are, are unavoidable and do not depend on us.
You are commenting the work of guys that are giving the maximum of themselves 10 years since for 10-15 hours a day, including weekends, 350 days per year.
Warm Regards,
A.R.
Bill Conley:
This information will be given at the presentation.
Warm Regards,
A.R.
Greetings Andrea,
You have been very forthcoming to give us the energy output (electric & thermal) and dimensions of the SKL. Can you also provide the mass for Reactor, Cooling System and Controller? It would also be helpful to know how many reactors can be run by a single controller in order to allocate its mass properly.
Forgive me if you have already provided this information and I missed it.
Thanks for all your great work and enjoy your holidays – you have earned it!
BC
Dear Andrea,
When you announced that work by you and your team on the latest version of your device that showed such promise was suspended because you were taking a vacation, I came to the following conclusion.
It was your collaborators(partners or customers) that asked you to slow the program for some reason.
Slowing or stopping progress on such an important project would be like asking that work would stop on the atomic bomb project during WW2 so that Oppenheim or Fermi could take a vacation.
I also feel that using the Covirus as an excuse is a ploy to delay the introduction of your device.
My advice, which is worth 2 cents, would be to do what you can to get the necessary disclosures to present your device for the public as soon as possible.
We are not getting younger.
Cautious regards
Dear Readers:
Please go to
http://www.rossilivecat.com
to find comments published today in other posts of this blog,
Warm Regards,
A.R.
Sam:
1- yes
2- I will attend
Warm Regards,
A.R.
Hello DR Rossi
Has your partner chosen who
will do the third party test?
Will you be involved in the testing?
Regards
Sam
E.Hergen:
1- yes
2- approximatively
3- yes
Warm Regards,
A.R.
Roberto Ridolfi:
Thank you and
Buon Ferragosto
to all our Italian Readers,
Warm Regards
A.R.
Pekka Janhunen:
Thank you for the suggestion.
Warm Regards,
A.R.
Dear Andrea,
Could the picometric electron aggregates be “seen”, for example by shooting some suitable particle beam (perhaps electron beam) into the matter and observing how it scatters? Everything in atomic scale and below is unobservable using optical means, but still we know a great deal of them. The knowledge usually comes from some scattering experiments. The scale is between nuclear and atomic, and both can be “seen” using scattering experiments, so perhaps also the picometric stuff.
Wondering regards, /pekka
Dear Andrea:
Buon Ferragosto !
Roberto
Mr. Rossi,
with high hopes we are all looking forward to the third party test in september. Some questions:
Is the e-cat skl ready for the test?
Do you already have a date for the test?
What is your team doing during your holidays? Is your team on hoidays, too?
As always, thank you for your time for us.
E. Hergen