Michael:
Will all be answered at the presentation: by the way, the video will be linked to a Q&A section, so everybody will be able to put questions,
Warm Regards,
A.R.
Dear Mr. Rossi,
once you wrote for recharging is a just a new, cheap cartridge necessary.
1) Why it changed to “it has to be done by Leonardo Corp”?
2) What about the costs for this cartridge and how long does it last?
3) Maintenance, which costs? And how often?
Or will all be answered at the presentation?
Best regards
Michael
Dear Andrea,
Yesterday, in your reply to Frank Acland you wrote: “we will make one module that will be combined in the assemblies the Customer will need”
In December 2020 I asked you, regarding an experiments of yours: “Do the 100 eCat-SKL modules each have their own load or are they connected in series or parallel?”
Your answer was: “They are connected in parallel to serve the same load.”
Now, is this connection used for the eCat-SKL modules also?
Dear Andrea
Will an SKL, which is connected to the regular grid, be suitable for supplying ordinary home chargers to electric vehicles with the energy they need?
Sincerely, Svein H. Vormedal
Your response to Calle H states that the E-Cat SKLed and the future E-Cat SKL electrical energy generator will share common components, but presumably the E-Cat SKLed has LED light sources while the E-Cat SKL does not. Further, because of the use of common components, the threshold for starting the volume production and sale of E-Cat SKLed, and the E-Cat SKL would be that preorders for the combined total of both SKLed and SKL products must exceed 1 million units.
Your response to Frank Acland states that the future E-Cat SKL product will consist of assemblies of energy generating modules the number of which is determined by the customer.
Question 1
Is the same energy generating method used in both the E-Cat SKLed and E-Cat SKL?
Question 2
Does the future SKL generator product contain a customer selected number of SKL energy modules where each SKL energy module contains of a fixed number of SKLed energy modules?
If the answer to question 2 is “Yes” then everything you are doing makes sense to me. The E-Cat SKL energy generator would essentially be a non-rechargeable battery with an energy density much higher than any chemical battery, or fuel. Rather than refueling the E-Cat SKL Leonardo will be recycling it.
Question 3
Is my concept correct?
I wish you the best of luck on your upcoming presentation.
Here is an interesting LED photo light that is just reaching the market. Continuous: 9000/6000 lumens; Burst: 18,000 lumens
The demand is there. If the SKLED can equal this with much lower power consumption, it could revolutionize photo and video production.
How will the SKL be refueled, will it need to be sent back to the factory or can it be refueled on site. I cannot wait to integrate it into our energy projects.
This paper on possible Excess heat in Ni + H an Ni + D systems recently published 28 October in the Journal of Physics Communications looks interesting.
Regarding the E-Cat SKL product which you hope to launch in 2022:
1. Will you offer SKLs of various power ratings?
2. Will customers be able to combine individual SKLs into a single circuit to increase the total power output?
@michele fabbro,
grazie per le tue parole.
Sono d’accordo che i giovani dovrebbero studiare, ma anche gli anziani, come me, dovrebbero continuare a farlo, non fosse altro per tentare di aiutare le giovani generazioni a risolvere “quel mare di problemi” che gli abbiamo causato lasciandogli un MONDO sull’orlo del baratro.
Ieri sera, dalla Gruber, l’ing. De Benedetti ha chiesto scusa – in diretta tv – ai giovani per gli errori Di sottovalutazione del problema ambientale che il sistema industriale, cui apparteneva e appartiene – ha commesso nei decenni passati.
Speravo che ANDREA cogliesse l’urgenza del mio appello, ma evidentemente non sono stato abbastanza chiaro od efficace, nonostante abbia scientemente utilizzato la mia lingua, la sua lingua …, ma, evidentemente non è bastato.
Pazienza!
English synopsis:
@ Michele Fabbro: I confirm my support to your comment and my suggestion to Andrea Rossi
Dr. Rossi,
This may or may not be in your current plans with respect to the December 9 presentation, but one thing I’d love to see is to have the Ecat-SKL demonstration followed up with days/weeks/months of the same setup shown continually streaming on the internet, still working and still powering the “load”.
For example there could be a streaming sub-window showing a pair of KWH meters, input and output, slowly creeping up over time and another sub-window showing the entire demo setup in continual operation (and of course the rest of your lab hidden from view).
Aside from a personal interest (it would be thrilling to check it out every day), it might be a way to expand on the increased awareness generated by your 12/9 demo, and beyond that it will help cement the understanding that yours is a device that has capacity far, far beyond that of a common battery.
I would like to pick up on what you said to Ruedi regarding a pre-order of 1000 SKLs. I think it would be good enough to produce a first run of just 10 devices and deliver them to well-known people. I believe that’s enough to most of us to be convinced that the SKL can deliver what will be promised. This would be an excellent publicity. What is your take on this?
Is the SKL completely ready to deliver inductive current now?
Are you close to the certification of the SKL?
I wish you lots of success with the introduction of SKL and SKLED!
Dear Mr. Rossi,
does your E-cats (SKLED – light, SKL – electric, or SK – termal) may reach CoP 26? CoP – for Coefficient of Performance, often discussed on this beautifull blog.
I am shure that it will reach COP27! COP – for Conference of Parties.
Calle H:
There is no competition, but integration. Since they have many parts in common, we will daliver also if the million units will be combined.
Warm Regards,
A.R.
Dear Dr. Rossi,
Please allow me ask for some clarification in your reply to Juan Carlos.
Is it correct that the SKL will be put in production when receiving at least 1 million orders, i.e. same condition as for the SKLed and that this is very likely it will occur in the first quarter of 2022. So, there is now competition between the SKL and SKLed. One of the two will probably win as it may not be likely that the SKL and SKLed orders will each exceed 1 million. At least not at the same time. The status of the ordering books will then be important to be disclosed. No one would like to have bet on a horse that will not make it to the finish line. Please forgive me if I have not understood correctly.
Kind regards,
Calle H
Dear Mr Rossi
Great news regarding SKL! I believe that SKL has a greater opportunity to reach 1 million pre-ordered units within a reasonable period of time than SKLed. In order to have a quick impact, it is probably necessary for SKL to be launched by a large, well-known global company. Will SKL be launched as a “pure” Leonardo Corporation product or will it be done in collaboration with a well-known partner?
Kind Regards
/P
Dear Dr. Rossi –
regarding the Ecat SKL that you are going to present –
what kind of power range are you going to show?
1. up to 100w
2. up to 1kw
3. up to 5kw
4. more than 5kw
Dear Mr. Rossi,
you wrote you need 1 million orders for the Ecat SKL, too:
Would it be possible to produce about 1000 pieces for pre-orders so that these customers can test it, comment it in social network, make youtube-videos.. just in addition to advertisements and to promote it to get the 1 million orders?
Best
Juan Carlos:
It is very difficult for me to answer you, and I want not to expose you to liabilities versus your neighbors. The diffusion of the Ecats depends on the economy scale that we will reach only if we will collect at least orders for one million units, and this is valid either for the Ecat SKLed and the SKL, that very likely will be put for sale at the same conditions of the SKLed in the first quarter of the 2022. This is all I can honestly say.
Warm Regards,
A.R.
I live in northern Germany in an apartment building with 25 units. Sometime in the next 5 years, our building will need a new heating system, since the old one is now 32 years old, and keeps breaking down. I keep telling the others, that they should be patient, and not too quick to buy a natural gas system. I tell them that an Ecat heater will be available, in “just a couple of years”.
But I don’t want to lead people astray. And I don’t want to raise false hopes.
Does that sound realistic to you? An Ecat heat-source for a 25-apartment building in the next couple of years? And one that “normal people” (as opposed to “rich” people) will be able to finance?
It’s OK if you say, “No, it will be more like 7-10 years”. I won’t be angry, I just want to know what I can realistically tell other people.
The United States has a long tradition of nationalizing existing private enterprise such as trains and railroads during the Civil War; and railroads, telegraph, telephone and radio systems during WWI. During WWII nationalization of dozens of textile, mining and transportation firms were mostly done to resolve production shortages. There are well over 100 other examples of implementing nationalization or operational control under public authority since then, not only in wartime but also during economic crisis.
Some consider climate change such a crisis and suggest that the U.S. should now nationalize the fossil fuel industry to reduce their output of products that contribute to greenhouse gas emissions. I think that unlikely. However, if reaching the targets being set during COP26 become as fruitless as reaching past targets there could come a time when eliminating emissions faster by publicly controlling private remedies, such as the E-Cat, comes under discussion.
Dear Dr. Rossi,
May I ask if you could deliver the SKLed with a infrared LED instead of the cold white LED. This would open applications such as room heating, comfort at outdoor restaurants, etc., and speed up your 1 million order target. I expect that the answer is no because you and your team and partners have already considered this option. With a no, may I ask if it is because:
1) the LED in the SKLed is not compliant with IR LED or any other regular LEDs
2) the 1 million target is already reached
3) you and your partners have a different objective
Thank you if you can answer.
Kind regards,
Calle H
@ cesare ferrari
I would like to say that I very much appreciated your speech, I hope that many young people will see the interviews with Focardi and Rossi and learn.
the young people must study, the only way to really change things.there is a lot of work to be done
thanks for your words
Franco Pirri:
The SKL can be assembled in series and/or parallel
Warm Regards,
A.R.
Michael:
Will all be answered at the presentation: by the way, the video will be linked to a Q&A section, so everybody will be able to put questions,
Warm Regards,
A.R.
Dear Mr. Rossi,
once you wrote for recharging is a just a new, cheap cartridge necessary.
1) Why it changed to “it has to be done by Leonardo Corp”?
2) What about the costs for this cartridge and how long does it last?
3) Maintenance, which costs? And how often?
Or will all be answered at the presentation?
Best regards
Michael
Dear Andrea,
Yesterday, in your reply to Frank Acland you wrote: “we will make one module that will be combined in the assemblies the Customer will need”
In December 2020 I asked you, regarding an experiments of yours: “Do the 100 eCat-SKL modules each have their own load or are they connected in series or parallel?”
Your answer was: “They are connected in parallel to serve the same load.”
Now, is this connection used for the eCat-SKL modules also?
Thank you if you can answer. Warm regards,
Franco
Dear Andrea
Will an SKL, which is connected to the regular grid, be suitable for supplying ordinary home chargers to electric vehicles with the energy they need?
Sincerely, Svein H. Vormedal
Gian Luca:
By Leonardo Corporation, along systens that will depend on the situation,
Warm Regards,
A.R.
Neal Chaves:
Thank you for the link,
Warm Regards,
A.R.
Dan Galburt:
Q1- confidential
Q2- no
Q3. no
Warm Regards,
A.R.
Dear Dr. Rossi,
Your response to Calle H states that the E-Cat SKLed and the future E-Cat SKL electrical energy generator will share common components, but presumably the E-Cat SKLed has LED light sources while the E-Cat SKL does not. Further, because of the use of common components, the threshold for starting the volume production and sale of E-Cat SKLed, and the E-Cat SKL would be that preorders for the combined total of both SKLed and SKL products must exceed 1 million units.
Your response to Frank Acland states that the future E-Cat SKL product will consist of assemblies of energy generating modules the number of which is determined by the customer.
Question 1
Is the same energy generating method used in both the E-Cat SKLed and E-Cat SKL?
Question 2
Does the future SKL generator product contain a customer selected number of SKL energy modules where each SKL energy module contains of a fixed number of SKLed energy modules?
If the answer to question 2 is “Yes” then everything you are doing makes sense to me. The E-Cat SKL energy generator would essentially be a non-rechargeable battery with an energy density much higher than any chemical battery, or fuel. Rather than refueling the E-Cat SKL Leonardo will be recycling it.
Question 3
Is my concept correct?
I wish you the best of luck on your upcoming presentation.
Warm Regards,
Dan Galburt
Dear Dr. Rossi,
Here is an interesting LED photo light that is just reaching the market. Continuous: 9000/6000 lumens; Burst: 18,000 lumens
The demand is there. If the SKLED can equal this with much lower power consumption, it could revolutionize photo and video production.
https://www.bhphotovideo.com/c/promotion/16767/light-and-motion.htm
Best wishes for a brilliant success.
Neal
Carissimo A.R.
How will the network for recharging and maintenance (extraordinary if needed) of the SKL be organized?
Sam:
No,
Warm Regards,
A.R.
Hello DR Rossi
Was the SKLed Performance tested
similar to what is in this Video?
https://youtu.be/TtVeRoD6yRw
Regards
Sam
Frank Acland:
1. no, we will make one module that will be combined in the assemblies the Customer will need
2. yes
Warm Regards,
A.R.
Stephen:
Thank you for the link,
Warm Regards,
A.R.
Manuel Cilia:
The maintebnance will be made directly from Leonardo Corporation,
Warm Regards,
A.R.
Dear Dr Rossi
How will the SKL be refueled, will it need to be sent back to the factory or can it be refueled on site. I cannot wait to integrate it into our energy projects.
Thank you
Dear Andrea
This paper on possible Excess heat in Ni + H an Ni + D systems recently published 28 October in the Journal of Physics Communications looks interesting.
https://iopscience.iop.org/article/10.1088/2399-6528/ac29ee/pdf
Are you already aware of it?
My apologies if it’s already been mentioned.
Thanks
Stephen
Dear Andrea,
Regarding the E-Cat SKL product which you hope to launch in 2022:
1. Will you offer SKLs of various power ratings?
2. Will customers be able to combine individual SKLs into a single circuit to increase the total power output?
Thank you,
Frank Acland
WaltC:
Thank you for your suggestion,
Warm Regards,
A.R.
@michele fabbro,
grazie per le tue parole.
Sono d’accordo che i giovani dovrebbero studiare, ma anche gli anziani, come me, dovrebbero continuare a farlo, non fosse altro per tentare di aiutare le giovani generazioni a risolvere “quel mare di problemi” che gli abbiamo causato lasciandogli un MONDO sull’orlo del baratro.
Ieri sera, dalla Gruber, l’ing. De Benedetti ha chiesto scusa – in diretta tv – ai giovani per gli errori Di sottovalutazione del problema ambientale che il sistema industriale, cui apparteneva e appartiene – ha commesso nei decenni passati.
Speravo che ANDREA cogliesse l’urgenza del mio appello, ma evidentemente non sono stato abbastanza chiaro od efficace, nonostante abbia scientemente utilizzato la mia lingua, la sua lingua …, ma, evidentemente non è bastato.
Pazienza!
English synopsis:
@ Michele Fabbro: I confirm my support to your comment and my suggestion to Andrea Rossi
Dr. Rossi,
This may or may not be in your current plans with respect to the December 9 presentation, but one thing I’d love to see is to have the Ecat-SKL demonstration followed up with days/weeks/months of the same setup shown continually streaming on the internet, still working and still powering the “load”.
For example there could be a streaming sub-window showing a pair of KWH meters, input and output, slowly creeping up over time and another sub-window showing the entire demo setup in continual operation (and of course the rest of your lab hidden from view).
Aside from a personal interest (it would be thrilling to check it out every day), it might be a way to expand on the increased awareness generated by your 12/9 demo, and beyond that it will help cement the understanding that yours is a device that has capacity far, far beyond that of a common battery.
Just a thought.
Best Regards,
WaltC
Nebo9:
We’ll see this together during the presentation,
Warm Regards,
A.R.
Sam:
In due time,
Warm Regards,
A.R.
Brice:
1- negative
2- indirectly
3- it is on course
Warm Regards,
A.R.
Dear Dr. Rossi,
I would like to pick up on what you said to Ruedi regarding a pre-order of 1000 SKLs. I think it would be good enough to produce a first run of just 10 devices and deliver them to well-known people. I believe that’s enough to most of us to be convinced that the SKL can deliver what will be promised. This would be an excellent publicity. What is your take on this?
Is the SKL completely ready to deliver inductive current now?
Are you close to the certification of the SKL?
I wish you lots of success with the introduction of SKL and SKLED!
Brice
Hello DR Rossi
Congratulations on receiving
SKLed Certification.
Can you say the type of
mark will be on the Product?
https://www.agcled.com/blog/led-lighting-certifications-you-need-to-know.html
Regards
Sam
Dear Mr. Rossi,
does your E-cats (SKLED – light, SKL – electric, or SK – termal) may reach CoP 26? CoP – for Coefficient of Performance, often discussed on this beautifull blog.
I am shure that it will reach COP27! COP – for Conference of Parties.
Best wishes to you and your team,
Nebo9
Ruedi:
No
Warm Regards,
A.R.
Energy User:
The chracteristecs will be published at the presentation,
Warm Regards,
A.R.
P:
So far it’s a Leonardo Corporation product.
Warm Regards,
A.R.
Darko:
Yes
Warm Regards,
A.R.
Calle H:
There is no competition, but integration. Since they have many parts in common, we will daliver also if the million units will be combined.
Warm Regards,
A.R.
Dear Dr. Rossi,
Please allow me ask for some clarification in your reply to Juan Carlos.
Is it correct that the SKL will be put in production when receiving at least 1 million orders, i.e. same condition as for the SKLed and that this is very likely it will occur in the first quarter of 2022. So, there is now competition between the SKL and SKLed. One of the two will probably win as it may not be likely that the SKL and SKLed orders will each exceed 1 million. At least not at the same time. The status of the ordering books will then be important to be disclosed. No one would like to have bet on a horse that will not make it to the finish line. Please forgive me if I have not understood correctly.
Kind regards,
Calle H
Dear Dr. Rossi,
Have you received the certification for SKLed?
Best regards,
Darko
Dear Mr Rossi
Great news regarding SKL! I believe that SKL has a greater opportunity to reach 1 million pre-ordered units within a reasonable period of time than SKLed. In order to have a quick impact, it is probably necessary for SKL to be launched by a large, well-known global company. Will SKL be launched as a “pure” Leonardo Corporation product or will it be done in collaboration with a well-known partner?
Kind Regards
/P
Dear Dr. Rossi –
regarding the Ecat SKL that you are going to present –
what kind of power range are you going to show?
1. up to 100w
2. up to 1kw
3. up to 5kw
4. more than 5kw
Thank you for your reply.
Dear Mr. Rossi,
you wrote you need 1 million orders for the Ecat SKL, too:
Would it be possible to produce about 1000 pieces for pre-orders so that these customers can test it, comment it in social network, make youtube-videos.. just in addition to advertisements and to promote it to get the 1 million orders?
Best
Juan Carlos:
It is very difficult for me to answer you, and I want not to expose you to liabilities versus your neighbors. The diffusion of the Ecats depends on the economy scale that we will reach only if we will collect at least orders for one million units, and this is valid either for the Ecat SKLed and the SKL, that very likely will be put for sale at the same conditions of the SKLed in the first quarter of the 2022. This is all I can honestly say.
Warm Regards,
A.R.
Dear Dr. Rossi,
I live in northern Germany in an apartment building with 25 units. Sometime in the next 5 years, our building will need a new heating system, since the old one is now 32 years old, and keeps breaking down. I keep telling the others, that they should be patient, and not too quick to buy a natural gas system. I tell them that an Ecat heater will be available, in “just a couple of years”.
But I don’t want to lead people astray. And I don’t want to raise false hopes.
Does that sound realistic to you? An Ecat heat-source for a 25-apartment building in the next couple of years? And one that “normal people” (as opposed to “rich” people) will be able to finance?
It’s OK if you say, “No, it will be more like 7-10 years”. I won’t be angry, I just want to know what I can realistically tell other people.
John Engel:
Thank you for the update,
Warm Regards,
A.R.
Gregory Daigle:
No.
Warm Regards,
A.R.
Dr Rossi,
The United States has a long tradition of nationalizing existing private enterprise such as trains and railroads during the Civil War; and railroads, telegraph, telephone and radio systems during WWI. During WWII nationalization of dozens of textile, mining and transportation firms were mostly done to resolve production shortages. There are well over 100 other examples of implementing nationalization or operational control under public authority since then, not only in wartime but also during economic crisis.
Some consider climate change such a crisis and suggest that the U.S. should now nationalize the fossil fuel industry to reduce their output of products that contribute to greenhouse gas emissions. I think that unlikely. However, if reaching the targets being set during COP26 become as fruitless as reaching past targets there could come a time when eliminating emissions faster by publicly controlling private remedies, such as the E-Cat, comes under discussion.
Does that worry you?
Calle H:
There would be issues with the certification, but your suggestion can be as an advice stored for the future.
Warm Regards,
A.R.
Dear Dr. Rossi,
May I ask if you could deliver the SKLed with a infrared LED instead of the cold white LED. This would open applications such as room heating, comfort at outdoor restaurants, etc., and speed up your 1 million order target. I expect that the answer is no because you and your team and partners have already considered this option. With a no, may I ask if it is because:
1) the LED in the SKLed is not compliant with IR LED or any other regular LEDs
2) the 1 million target is already reached
3) you and your partners have a different objective
Thank you if you can answer.
Kind regards,
Calle H
On Powr Engineering issue of November 2nd 2021
The latest on fire at GRDA combined cycle generating unit
John Engel
Dear Readers:
Please go to
http://www.rossilivecat.com
to find comments published in other posts of this blog,
Warm Regards,
A.R.
@ cesare ferrari
I would like to say that I very much appreciated your speech, I hope that many young people will see the interviews with Focardi and Rossi and learn.
the young people must study, the only way to really change things.there is a lot of work to be done
thanks for your words
WaltC:
More than one,
Warm Regards,
A.R.
Sam:
Thank you for the link,
Warm Regards,
A.R.