Dear Dr Andrea Rossi:
First and foremost, enjoy your Sunday today.
Did I understand well that the next customer where Leonardo Corporation is installing an industrial E-Cat is in Europe ?
Thanks,
Jonathan
Dear Andrea Rossi:
Can you give us information about the charge of the E-Cat X ?
Is there any difference, after the tests made so far, from the standard E-Cat?
Mark Jansen:
Do not worry: my IP will always remain property of Leonardo Corporation. Maybe you are right, but we are ready to fight; by the way, when a guy passes through what I had to in my life and survives….
Warm Regards,
A.R.
Jenny:
Thanks to you and to all the Readers whose sustain has been a pillar of our work and when I say “our” I mean the work of my great Team.
Warm Regards,
A.R.
Hi Andrea
Please don’t let some big companies buy your IP. They will sit on it for 10-15 years and humanity will suffer. A minute they delay this technology, there will be some more poor kids who die. They can manipulate public opinion by using best law firm.
Dear Andrea Rossi:
I read your comment in which at last you informed us that you had ominous signs of a suspect of cancer, but you delayed controls not to compromise the test of the 1 MW plant in operation in the customer’s factory; in July you returned to the container of the plant after the hernia surgery the same day, with strong pain killers to resist the pain: thank you, Andrea and thanks God for the good results of the clinic results youi got this week.
Jenny
Ron Stringer:
He,he,he…by the way, I am not an engineer too, and I too make many errors: only they who do not work do not make errors.
Warm Regards,
A.R.
Peter Metz:
Our exclusive licensee also for the USA is Industrial Heat.
About the availability of our products on the market: F8+F9. This means that our R&D is very promising, but still is on course, and the final results could be either positive or negative.
Warm Regards,
A.R.
Aaron:
I made terribly well: lost 6-0; 6-0; 6-2. The progress of mine has surely been born by the h-bar spin of the services. Still the Tennis-ERV said it was due to the compassion of the foe, that deliberately, he says, shoot to the net, but he understands nothing of tennis, let alone of h-bar considerations.
Warm Regards,
A.R.
After extensive calculations (Note 1: 10x10x10 = 1000) đ ; a System composed of 1000 1 MW Quarkx subsystems would occupy 1000 cubic meters or 10 meters x 10 meters x 10 meters. Or about 33 feet in each dimension.
That would be a lot of Quarkxes, but produce a total of 1000 MW or 1 Gigawatt. (Thermal)
As for production of electricity, if the output current were alternating (at 50 or 60 Hz), the results would be both positive and negative (and briefly zero).
(Note 2) Maybe a cube is not the best geometry, since it could be difficult to change out the innermost subsystems for maintenance.
Dear Andrea Rossi:
How is gone your tennis match with your wife today?
Has your wife been able to respond to your tremendous h-bar spinning service balls ?
Cheers,
Aaron
Your revelations about the Quark/X E-Cats are fantastical. I can hardly wait till June when if all goes well you disclose some information about these new devices and/or their new installation. I live in the US and am wondering if devices based on Quark/X E-Cats will be available here and from whom!
Thanks and I wish you continued good success with your innovations.
Dear Dr. Rossi,
Well, that’s probably why I am a psychologist and you are an engineer. Very little in my work depends upon accurately and quickly working with exponents. I think this arrangement is beneficial to us both, and to humanity.
All the best.
Ron
Dr Andrea Rossi:
I read that you delayed the clinic analysis over a suspect of cancer, risking your life, not to interrupt the test of the 1 MW plant. I naver have seen such a dedication.
If you will get a success, you will have surely merited it.
This is why an enormous crowd is sustaining you.
Godspeed, Andrea!
Charlize
Ron Stringer:
Thank you for your kind words.
About the volume, please allow me to correct you: 1 cubic meter is made by 10^6 cubic cm.
10^6/10^4 -> 10^2
This having been said, all the necessary characteristics of the E-Cat QuarkX will be delivered after the completion of the preliminar R&D. F8, F9.
Yes, our robotized production line is designed to manipulate properly the items we need to assembly.
Warm Regards,
A.R.
First of all, very glad you are well and healthy! What a decision to make, working at the plant rather than take time to see the doctor… Glad that worked out the way it did. I’m not sure if I should stand quietly in awe of your determination or scold you loudly, for a long time. I assume your wife will have dealt with this already. You owe her a LOT of tennis, and you had better let her win.
Secondly, if you anticipate the new 1MW reactor to fit in a cubic metre, that implies that, at maximum, each of the component quarkx is 1/10000 cubic metre in volume, or 0.1 cubic cm. That is assuming that there is nothing else in the box!
You are going to need robots with very tiny fingers to assemble these things. Can you tell us the actual size of a quark unit? (I am using quark as the single and quarkx as plural.)
Stay well!
Ron
Dixy:
There was that fear since several months, due to ominous signs, but I wanted not to risk to suspend the test of the 1 MW plant, that was a real risk for everything. As soon as the test has been completed I made a very complete series of scopies and analysis and what turned out is that I have some minor problem, but nothing serious.
I am very well and safe.
Thank you for your concern,
Warm Regards,
A.R.
Jean:
A very hard work: 2 x tennis matches with my wife, but this time I am very well trained: I exercised my services, now I can shoot the ball with an intrinsic angular momentum of h bar, making the trajectory practically unforeseeable. My invention.
Warm Regards,
A.R.
Italo R.:
It is still too dangerous for common People invest in us; we must wait for our product to be sold massively in the market to be sure that we can accept money from non professional investors; when we will be able to sell massively our E-Cats, Leonardo Corporation will go public. We are beginning to prepare for this, but, again, until our E-Cats will not be in the market I want not to play American foot-ball with your bones.
F8, F9.
Warm Regards,
A.R.
Dear Andrea,
IF it would happen to be so that accumulation of helium inside the fuel particles is what limits the lifetime of the charge, then the following might be of interest:
“The MIT team found that by mixing carbon nanotubes with the metal in quantities of less than two percent by volume during manufacturing, the metal becomes much more resistant to radiation. If the nanotubes are evenly distributed, they produce what the team calls a percolating one-dimensional transport network that channels the helium out of the metal before it can cause damage.”
Dr Joseph Fine:
1- yes
2- not necessarily
3- yes, but it is not a good thing make safety devices of a system depend on instrumentation internal of the system itself.
Warm Regards,
A.R.
Koen Vandewalle:
I will give detailed infotmation of the E-Cat QuarkX after we will have completed the preliminar R&D.
Probably in the press conference that Leonardo Corporation will make in June.
Warm Regards,
A.R.
The sensors that measure important operating parameters (temperature, pressure, operating status (?) etc.) for each E-Cat Quarkx system (or “QuarkX”) are/(will be) designed to withstand the conditions where they have been installed.
1- Since each Quarkx has its own control processor and there probably are redundant and higher level control (âmanagementâ) processors, can all or most of the control system and related instrumentation be operated remotely?
2- Or must some of the processors be placed close to the Quarkx modules?
3- If so can existing Leonardo Corp’s transfer techniques be used to cool these processors and related instrumentation to safe temperatures, so vital electronics donât burn out, lose power or operate erratically?
In other words, you have to cool the individual modules to remove heat, and you may also have to cool the control processors and other instrumentation so everything else runs safely and efficiently.
Dear Dr Andrea Rossi:
First and foremost, enjoy your Sunday today.
Did I understand well that the next customer where Leonardo Corporation is installing an industrial E-Cat is in Europe ?
Thanks,
Jonathan
Dear Andrea Rossi:
Can you give us information about the charge of the E-Cat X ?
Is there any difference, after the tests made so far, from the standard E-Cat?
Mark Jansen:
Do not worry: my IP will always remain property of Leonardo Corporation. Maybe you are right, but we are ready to fight; by the way, when a guy passes through what I had to in my life and survives….
Warm Regards,
A.R.
Jenny:
Thanks to you and to all the Readers whose sustain has been a pillar of our work and when I say “our” I mean the work of my great Team.
Warm Regards,
A.R.
Hi Andrea
Please don’t let some big companies buy your IP. They will sit on it for 10-15 years and humanity will suffer. A minute they delay this technology, there will be some more poor kids who die. They can manipulate public opinion by using best law firm.
Dear Andrea Rossi:
I read your comment in which at last you informed us that you had ominous signs of a suspect of cancer, but you delayed controls not to compromise the test of the 1 MW plant in operation in the customer’s factory; in July you returned to the container of the plant after the hernia surgery the same day, with strong pain killers to resist the pain: thank you, Andrea and thanks God for the good results of the clinic results youi got this week.
Jenny
Giuseppe:
Combined.
Warm Regards,
A.R.
Ron Stringer:
He,he,he…by the way, I am not an engineer too, and I too make many errors: only they who do not work do not make errors.
Warm Regards,
A.R.
Andrea,
you say that 1MW Quark E-Cat is smaller than 1 cubic meter, but, are we talking about Electricity, Thermal or combined.
Best Regards, Giuseppe
Peter Metz:
Our exclusive licensee also for the USA is Industrial Heat.
About the availability of our products on the market: F8+F9. This means that our R&D is very promising, but still is on course, and the final results could be either positive or negative.
Warm Regards,
A.R.
Aaron:
I made terribly well: lost 6-0; 6-0; 6-2. The progress of mine has surely been born by the h-bar spin of the services. Still the Tennis-ERV said it was due to the compassion of the foe, that deliberately, he says, shoot to the net, but he understands nothing of tennis, let alone of h-bar considerations.
Warm Regards,
A.R.
Peter:
It’s the quarks model: small things make the Universe.
Warm Regards,
A.R.
Dr Joseph Fine:
Your math and geometrical consideration are correct, but add the 2 basic functions: F8 + F9.
Warm regards,
A.R.
Charlize:
Thank you very much.
Still a hard work remains to be performed, though.
Warm Regards,
A.R.
Andrea Rossi, Wendy, Ron Stringer,
After extensive calculations (Note 1: 10x10x10 = 1000) đ ; a System composed of 1000 1 MW Quarkx subsystems would occupy 1000 cubic meters or 10 meters x 10 meters x 10 meters. Or about 33 feet in each dimension.
That would be a lot of Quarkxes, but produce a total of 1000 MW or 1 Gigawatt. (Thermal)
As for production of electricity, if the output current were alternating (at 50 or 60 Hz), the results would be both positive and negative (and briefly zero).
(Note 2) Maybe a cube is not the best geometry, since it could be difficult to change out the innermost subsystems for maintenance.
Thermal regards,
Joseph Fine
Dear Andrea Rossi:
The power density of the E-Cat QuarkX is impressive.
Dear Andrea Rossi:
How is gone your tennis match with your wife today?
Has your wife been able to respond to your tremendous h-bar spinning service balls ?
Cheers,
Aaron
Dear Andrea Rossi,
Your revelations about the Quark/X E-Cats are fantastical. I can hardly wait till June when if all goes well you disclose some information about these new devices and/or their new installation. I live in the US and am wondering if devices based on Quark/X E-Cats will be available here and from whom!
Thanks and I wish you continued good success with your innovations.
Sincerely,
Peter Metz
Dear Dr. Rossi,
Well, that’s probably why I am a psychologist and you are an engineer. Very little in my work depends upon accurately and quickly working with exponents. I think this arrangement is beneficial to us both, and to humanity.
All the best.
Ron
Quest:
Fantastic!
Warm Regards,
A.R.
Dr Andrea Rossi:
I read that you delayed the clinic analysis over a suspect of cancer, risking your life, not to interrupt the test of the 1 MW plant. I naver have seen such a dedication.
If you will get a success, you will have surely merited it.
This is why an enormous crowd is sustaining you.
Godspeed, Andrea!
Charlize
Ron Stringer:
Thank you for your kind words.
About the volume, please allow me to correct you: 1 cubic meter is made by 10^6 cubic cm.
10^6/10^4 -> 10^2
This having been said, all the necessary characteristics of the E-Cat QuarkX will be delivered after the completion of the preliminar R&D. F8, F9.
Yes, our robotized production line is designed to manipulate properly the items we need to assembly.
Warm Regards,
A.R.
Hello Dr Rossi,
we know your an avid cyclist, take a look at this video:
Robots Just 3D Printed a Stainless Steel Bicycle
http://futurism.com/videos/robots-just-3d-printed-stainless-steel-bicycle/
First of all, very glad you are well and healthy! What a decision to make, working at the plant rather than take time to see the doctor… Glad that worked out the way it did. I’m not sure if I should stand quietly in awe of your determination or scold you loudly, for a long time. I assume your wife will have dealt with this already. You owe her a LOT of tennis, and you had better let her win.
Secondly, if you anticipate the new 1MW reactor to fit in a cubic metre, that implies that, at maximum, each of the component quarkx is 1/10000 cubic metre in volume, or 0.1 cubic cm. That is assuming that there is nothing else in the box!
You are going to need robots with very tiny fingers to assemble these things. Can you tell us the actual size of a quark unit? (I am using quark as the single and quarkx as plural.)
Stay well!
Ron
Dixy:
There was that fear since several months, due to ominous signs, but I wanted not to risk to suspend the test of the 1 MW plant, that was a real risk for everything. As soon as the test has been completed I made a very complete series of scopies and analysis and what turned out is that I have some minor problem, but nothing serious.
I am very well and safe.
Thank you for your concern,
Warm Regards,
A.R.
Jean:
A very hard work: 2 x tennis matches with my wife, but this time I am very well trained: I exercised my services, now I can shoot the ball with an intrinsic angular momentum of h bar, making the trajectory practically unforeseeable. My invention.
Warm Regards,
A.R.
Sasha:
Gauge bosons have whole spin; scalar bosons have spin zero.
Warm Regards,
A.R.
Wendy:
Much smaller. I think it could be contained in a cubic meter.
Warm Regards,
A.R.
Dear Andrea Rossi,
A 1 MW plant made by the QuarkX Ecat would be smaller of the 1 MW E-Cat tested for one year ?
Thanks,
Wendy
Dr Andrea Rossi:
Which is the difference between scalar bosons and gauge bosons, in essence?
Dr Andrea Rossi,
Is it true that you were suspected to have a cancer ? How is the situation ?
We need you.
God bless you,
Dixy
Frank Acland:
Industrial Heat has the exclusive license also for the USA.
Warm Regards,
A.R.
Dear Andrea,
Will Leonardo Corporation be selling its products directly in the USA, or will sales and distribution go through Industrial Heat?
Many thanks,
Frank Acland
Dr Andrea Rossi:
This saturday and sunday which work will you do ? Just a curiosity.
Cheers,
Jean
Pekka Janhunen:
Very interesting. I did not know. Thank you for this information,
Warm Regards,
A.R.
Italo R.:
It is still too dangerous for common People invest in us; we must wait for our product to be sold massively in the market to be sure that we can accept money from non professional investors; when we will be able to sell massively our E-Cats, Leonardo Corporation will go public. We are beginning to prepare for this, but, again, until our E-Cats will not be in the market I want not to play American foot-ball with your bones.
F8, F9.
Warm Regards,
A.R.
Dear Andrea,
IF it would happen to be so that accumulation of helium inside the fuel particles is what limits the lifetime of the charge, then the following might be of interest:
http://www.gizmag.com/carbon-nanotubes-radiation-protection/42148/
“The MIT team found that by mixing carbon nanotubes with the metal in quantities of less than two percent by volume during manufacturing, the metal becomes much more resistant to radiation. If the nanotubes are evenly distributed, they produce what the team calls a percolating one-dimensional transport network that channels the helium out of the metal before it can cause damage.”
best regards, /pekka
Dr Joseph Fine:
1- yes
2- not necessarily
3- yes, but it is not a good thing make safety devices of a system depend on instrumentation internal of the system itself.
Warm Regards,
A.R.
Koen Vandewalle:
I will give detailed infotmation of the E-Cat QuarkX after we will have completed the preliminar R&D.
Probably in the press conference that Leonardo Corporation will make in June.
Warm Regards,
A.R.
Dear Andrea Rossi,
Does She also produce light ?
Kind Regards,
Koen
Dear Andrea,
The sensors that measure important operating parameters (temperature, pressure, operating status (?) etc.) for each E-Cat Quarkx system (or “QuarkX”) are/(will be) designed to withstand the conditions where they have been installed.
1- Since each Quarkx has its own control processor and there probably are redundant and higher level control (âmanagementâ) processors, can all or most of the control system and related instrumentation be operated remotely?
2- Or must some of the processors be placed close to the Quarkx modules?
3- If so can existing Leonardo Corp’s transfer techniques be used to cool these processors and related instrumentation to safe temperatures, so vital electronics donât burn out, lose power or operate erratically?
In other words, you have to cool the individual modules to remove heat, and you may also have to cool the control processors and other instrumentation so everything else runs safely and efficiently.
Optimal regards,
Joseph Fine
Dear Dr. Rossi a question:
Is it possible for us common people invest some money in Leonardo Corporation (USA)?
Bet Regards,
Italo R.
Norman:
She is continuing to operate in the new laboratory of Leonardo Corporation and is still very, very promising.
Warm Regards,
A.R.
Lars Lindberg:
She can be combined.
Warm Regards,
A.R.
Koen Vandewalle:
I will be able to answer when the E-Cat X will be published, very likely in June.
Warm Regards,
A.R.
Dear Andrea Rossi,
Is it correct that the so-called “Self Sustaining Mode”, is no longer important or even counterproductive in the E-Cat QuarkX ?
Kind Regards,
Koen
Do you mean the quark can be used with other heatsources and produce electricity in a meningfull way?
Dear Dr Andrea Rossi:
Can you update us about the operation of the E-Cat quarkX ?
Cheers,
Norman
Bob:
1- yes
2- maybe
3- yes
Warm Regards,
A.R.
D.Travchenko:
Thank you,
Warm Regards,
A.R.