Dr Rossi,
Here are the stats of your papers on Researchgate I read today on http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
Total Readings: 118000 (of which 108360 0nly of “Ecat SK and long range particle interactions”)
Reccomendations: 8054
Citations + Mentions 53
Research Interest Score: 2097 (higher than the 99% of all the 15 millions of papers on Researchgate)
Most reading cathegories: A.I., Chemical Engineering, Electronic Engineering, Physics
Most reading seniority: Professors, PhD students, Researchers, Seniors
And counting…
Prof
Brokeeper:
Yes, wht you can see in the realtime, neverending for years youtube video https://youtu.be/tYHSR_HQwNI
is the atom of any bigger unit
Warm Regards,
A.R.
This is an astounding statement you provided about the mini ECat SKLep being the size of the atom. Is this revelation of its potential size reduction found within your recent discovery in response to Wilfried Babelotzky, “…the volume reduction would be substantial, albeit I prefer so far not to give numbers, notwithstanding the fact that that we are obtaining substantial results in this sense”?
Brokeeper:
1. yes
2. on the contrary, it costs less, due to higher economy scale. We will make assemblies of major power, but the “atom” will be the Mini-SKLep
3. one line is for the Mini-SKLeps, another for the assemblies
Warm Regards,
A.R.
1.Is Leonardo Corp. and your partners prepared for the massive numbers of orders once the ECat is released upon an unsuspecting green
energy starving world?
2.Will not manufacturing costs and efficiency of ten 10W mini ECat SKLeps be significantly more than manufacturing one 100W ECat SKLep?
Will that same ratio cost/efficiencies differences carry over to higher/lower 10 magnitudes of size and power that follows in the
future – like the 1W Ecats, 1kW
Ecats, etc.……?
3.Will different power ECat SKLeps be assembled on the same line or separate lines?
The latest information you shared, showing the lamp that is powered by the mini SKLep only using 1.8 mW is quite interesting. I hope you will reach the million preorders soon so we can finally expect the Ecats on the market and use this miracle.
I just want to share with you my latest hobby, which is riding an EUC (an electric Unicycle). I believe it is one of the most efficient vehicles that exist. It uses only 13.5 Wh/km over the more than 2500 km I drove with it since mid november last year.
I still hope you still try to get the SKLep to run on batteries without earthing. If that would be possible I could run the EUC without re-loading the battery on mains on only two mini SKLep’s forever!
Maybe also an hobby for you, I strongly recommend it. See: “72 year old guy learned to ride an EUC” https://youtu.be/t4S0steKSrQ
Kind regards, Gerard
Martin Nagl:
I prefer to keep this information confidential, until we reach the target. Pre-orders are growing, though, notwithstanding the vetting selection
Warm Regards,
A.R.
Steven Nicholes Karels,
When you go to the fourth and fifth decimal oscillations happen based on the demand of the Ecat, that depend from many internal factors that are confidential.
Warm regards,
A.R.
If you can afford you could buy a system with at least the double level of your average kW need.
This should handle most of your peak loads while it exports the
over-production back to the grid. Just like normal practice for most solar systems.
And just like for a solar system: the larger system, the shorter the payback time
and the more profit thereafter.
Of course, you must first get approval from your network supplier and follow all local rules.
There are at least three ways to compute the required amount of eCat power to buy for your residence.
1. Measure or calculate the lowest power consumption in your residence. Then all the eCat-generated power will go to reduce your electric bill and the saving will be at the maximum rate that you are charged.
2. Calculate the average daily energy consumption for your home. It will vary over the year. Buy enough eCat-generated power for the average consumption. The excess energy will go out to the electrical Grid and you may get nothing for the excess or a small portion of your rate returned to you.
3. Calculate or measure the peak energy consumption for your residence. Purchase that amount of eCat-generated power and the excess will go into the Grid. You will receive none or little for the excess energy going onto the Grid but you are helping to save the world.
Dear Readers:
IMPORTANT MESSAGE
We have been informed that somebody is selling the Ecat SKLep and the Mini Ecat SKLep, using order forms that are not ours.
Please read carefully what follows:
1- WE ACCEPT ONLY PRE-ORDERS MADE BY THE PRE-ORDER FORM PUBLISHED IN http://WWW.ECAT.COM AND IN http://WWW.ECATORDERS.COM AND ANY OTHER FORM WILL NOT BE ACCEPTED
2- WE ARE NOT ACCEPTING PAYMENTS FOR THE ECATS OF ANY KIND, BECAUSE WE WILL DELIVER THEM ONLY IF WE WILL COLLECT ORDERS FOR AT LEAST 1 MILLION UNITS
AS IT IS CLEARLY WRITTEN IN OUR PRE-ORDER FORM
3- IF ANYBODY ASKS YOU TO PAY ANY PRICE TO RECEIVE THE ECAT, ATTENTION, IT IS A FRAUD, BECAUSE WE WILL ASK PAYMENT ONLY WHEN WE WILL CONTACT OUR CLIENTS
TO DELIVER THE PRE-ORDERED ITEM: ONLY AT THAT POINT THE PRE ORDER WILL BE TURNED INTO A REGULAR ORDER, AND ONLY IF THE CLIENT WILL STILL WANT IT
4- ANY “ORDER FORM” IS FAKE, BECAUSE WE DO NOT ACCEPT ORDERS YET, WE ONLY ACCEPT PRE-ORDERS AT THE CONDITIONS CLEARLY EXPLAINED IN THE PRE-ORDER FORMS
5- IF YOU RECEIVE ORDER FORMS OR PRE-ORDER FORMS DIFFERENT FROM THE ONES PUBLISHED IN OUR WEBSITES, PLEASE FORWARD THEM TO: info@leonardocorp1996.com
WE WILL PASS THEM ON TO OUR LEGAL STAFF.
Warm Regards,
Dr Andrea Rossi, CEO
Leonardo Corporation
If I want to buy the best possible amount of ecatpower compared to my consumtion, how should I think and calculate? If I buy more than my avarage it will only be good at the top consumtion, or how should one think?
One of your previous posts indicated separate but identical measurements for the Mini-SKLep with the same lamp. The Mini-SKLep provides 5 W of power to the LED lamp. Your previous post identified an input voltage of 10.0 VDC and an input current pulse of 1/3 second every 8 – 10 seconds with a measured current level of 0.00018 Amps.
Calculating the COP for this statement, we assume an average time between pulses of 9 seconds. So, the lamp consumed energy is 45 Joules (9 seconds * 5 W).
The energy sent to the Mini-SKLep is 1/3 second * 10 V * 0.00018 Amps = 0.0006 Joules
The COP = Energy Out / Energy in = 45.0 / 0.0006 = approximately 75,000.
Note: This is different than the previously published value of 25,000. Is this because the measured current was averaged over one second? Please clarify.
Stephen:
Curious, but I didn’t notice any difference between Sundays and the other days. The temperature is almost the same every day, as well as humidity and power use.
It goes always, as we observed, with an average of 0.000 A for 8 to 10 seconds and with 0.001 A for about 1/3 of second. The oscillations depend on the demand of the Mini Ecat SKLep.
For the curiosity of our Readers: we are making the same measurements with another Mini Ecat SKLep, for other reasons, and we are making the measurements of current with a FLUKE amperometer that measures also the fourth and fifth decimals, and the result is: A= 0.00018 A, with 10 V, same light.
Warm Regards,
A.R.
I am trying to determine total electricity my home consumes on a continuous basis and purchase enough SKLep units to cover this amount (or perhaps slightly more).
1. Will it be possible to hire a qualified electrician to install a sufficient quantity of SKLep units at my home breaker box to cover this base load requirement of my home?
2. If so, will power for my house be drawn from the mains only when total load exceeds the maximum output of the installed SKLep units?
Dear Dr Andrea Rossi,
Watching your interview to Frank Acland, whose link is under the youtube video https://youtu.be/tYHSR_HQwNI
I saw you healthy and with your normal voice…much better that we watched and heard at the presentation of the Ecat SKLep in Miami about two years ago, where you were almost voiceless after the throat surgery: how did you recover so well from a so bad situation ?
Best
Luna
I placed an order for 20 units, I didn’t get any confirmation email. Have other buyers recieved confirmation emails? Let me know if it shows in your order list please?
It’s interesting how the PSU current in the live stream seems more steadily 0.000 on Sundays
I wonder if this is correlated to something.
Maybe temperature? Humidity? Other power use?
I did wonder if it might be correlated to the PF in the mains supply power. Either it’s value or variability. And if so if understanding it might help you get to grips with why the mains connection is currently needed and hopefully resolve it.
Dear bloggers,
to help Leonardo reach the target of preorders for 1 million units it is useful to turn viral the view of the youtube video https://youtu.be/tYHSR_HQwNI
To make this is not difficult if each of us makes 20 persons view it and incourage them to pass the parole so that every following viewer generates ten new viewers; see what happens:
20 persons generate 10 viewers each = 200 viewers
200 persons generate 10 each = 2000 viewers
2000 generate 10 each = 20000 viewers
20000 generate 10 each = 200000 viewers
200000 generate 10 each = 2 millions of viewers (ALLELUJAH)
The video shows a product that is extremely convincing: light basically for free, while the fees to pay energy are skyrocketing, therefore I assume that 2 milllion viewers will buy, even only for curiosity, an average of 1 Mini Ecat SKLep each.
Instead of harassing Andrea to anticipate the deliveries, which is impossible, why don’t we just help him to find 10 viewers each, inviting a pass parole to all the following steps ?
Let’s GO !
I am starting now.
Silent Majority Guy
Greg Leonard:
Please send your pre-order update to http://www.ecatorders.com
or to http://www.ecat.com
The new pre-order will conserve the priority date of the former one,
Warm Regards,
A.R.
Dear AR,
I understand my existing order for 1 SKLep DC/DC will be replaced with 10 miniSKLep and one mains power adaptor.
I am extending my order to Twenty miniSKLep, covering another project, and some gifts to family and friends. The gifts will be single miniSKLep – each needing a power adaptor.
Project MiniSKLep Power adapter
Previous order 10 1
Gifts*6 6 6
48V project 4 1
This gives a total of 20 MiniSKLep and 8 power adapters.
My question is:
How do I show this on my updated order?
regards,
Greg Leonard
Joe:
We will accept these kinds of payment: Paypal, credit cards, bank wires, checks.
Obviously in our invoices will be also indicated the directions to pay by bank wire.
Warm Regards,
A.R.
Dear Dr. Rossi,
due to the company policy of paypal to fine customers with 2,500$ for so-called “misinformation” e.g. at social networks i do not want to risk my money and will never open a paypal account. Will you make public your IBAN and BIC before the delivery will start?
Best regards
Joe
Dear @Jitse
there is no need to waste money for a 12 kwh battery. As Dr. Rossi already answered it is possible to use just ecats. Just electricy which is needed over the installed power of ecat will be taken from the grid. So everyone should buy more ecat skl instead to waste money for batteries.
The EU is just a vasall of USA and will do what the ruling class of the USA (owners of oil, gas companies, finance groups) want to. China needs much energy, it buys from USA, Russia, Iran, Venezuela.. and this country is not ruled by billionaires. Also it is not possible for the western elite to coup or attack China, like they have done in Iraq, Libya, tried in Syria..
Best regards
R.Brand
@Italo R.
In this overview you will see all average electricity prices in the world, in March 2022: https://de.globalpetrolprices.com/electricity_prices/#hl121 (also for fuel and gas)
Up to now and above all in next year it is more expensive.
In Germany the costs for new customers (without an old contract) is about 55 to 98 ct/kwh.
But the house connection for electricity is normally limited to 14.5 KW, for those who heat with electricity to 34 KW.
Best regards
Michael
Maybe you are right in the first paragraphs (up to Any country) then it’s better to transfer all Ecat production to Europe.
With 3 KWh EcatSKLep and a 12 kWh battery We can completely decouple both grid: gas and electricity, (at home or only 6 kWh EcatSKLep), making my house completely self-supporting. Dear R.Brand, Maybe you are right in the first paragraphs (Any country) then it is better to transfer all production to Europe. With 3 KWh EcatSKLep and a 12 kWh battery I can completely decouple both grid: gas and electricity at home (or only 6 kWh EcatSKLep), making my house completely self-supporting. This could, for example, make all Dutch houses completely independent of networks in a few years.
(2nd paragraph) China does not seem to me be a good solution yet.
This could, for example, make all Dutch houses completely independent of al networks in a few years?
(2nd paragraph) China does not seem to me to be a good solution yet.
Dear Andrea,
I am reading the book you suggested “Unified Field Theory and Occam’s Razor” of Giorgio Vassallo et Al.
Can you suggest me the most important page of the book in relation to your work ?
Dear Doctor. Rossi and Readers:
Just to let you know. Here in Italy the total effective cost of my domestic electricity is around 0.19 euros / kWh. The total power available from the grid has been reduced last month from 3.1 kW to 2.6 kW to force users to reduce consumption.
Regards,
Italo R.
Steven Nicholes Karels:
Please remake the pre-order form here http://www.ecat.com
Resend it specifying that your former pre-order must be cancelled.
You will conserve the priority date of the former order,
Warm Regards,
A.R.
@Jitse
Unfortunately you are wrong. It would be the worst solution for the bourgeoisie of USA. e.g. With every fracking-LNG tanker to europe the USA makes 200 million $ profit, look also at the coups like Libya, the terror attack at Nordstream they made therefore… Everywhere, in nearly all countries their oil companies are participating. Countries in where they do not participate have to live under USA sanctions.
Every country (just the rich) with big oil companies, gas companies are the losers.
Therefore would be the people’s republic of China a good country which can lead. Then all other countries have no other option to follow and use the technology of ecat, because oil and gas are not competitive.
Best regards
R.Brand
If the Mini-SKLep will be the common component for the 100W class of SKLep units, I would like to change my order from 30 100W SKLep units to 360 10W Mini-SKLep units, configured for an output of 12VDC and 360W. How do I make that happen?
The simplicity of production and distribution of the EcatSKLep (10 W, 100 W or 1/2 MW containers) makes it the best competitor for all other energy sources.
There are no risks such as radiation, and the electricity grid no longer needs to be expanded.
By quickly realizing large Ecat factories, they create a strong response to natural gas producers and oil companies.
For Europe and the United States, this is far the best solution to the current energy problems.
Dear Dr. Rossi,
There was an interesting article in Swedish media some days ago where Elon Musk say: by far the greatest danger facing civilization is energy supply and too few babies. Question: Is there no way you can speed up the E-Cat and take it to the spring board and jump off?
Kind regards,
Calle H
Extending the analysis I previously made to a lifetime of 11 years, I then did a Ragone plot on the specific power and energy densities of the mini-SKLep. It appears slightly superior to any other kind of energy source. Therefore, the energy density, if it can last that long without degradation, seems in the range of nuclear or similar reactions.
Dr Rossi,
Here are the stats of your papers on Researchgate I read today on
http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
Total Readings: 118000 (of which 108360 0nly of “Ecat SK and long range particle interactions”)
Reccomendations: 8054
Citations + Mentions 53
Research Interest Score: 2097 (higher than the 99% of all the 15 millions of papers on Researchgate)
Most reading cathegories: A.I., Chemical Engineering, Electronic Engineering, Physics
Most reading seniority: Professors, PhD students, Researchers, Seniors
And counting…
Prof
Brokeeper:
Yes, wht you can see in the realtime, neverending for years youtube video
https://youtu.be/tYHSR_HQwNI
is the atom of any bigger unit
Warm Regards,
A.R.
Dear Andrea,
This is an astounding statement you provided about the mini ECat SKLep being the size of the atom. Is this revelation of its potential size reduction found within your recent discovery in response to Wilfried Babelotzky, “…the volume reduction would be substantial, albeit I prefer so far not to give numbers, notwithstanding the fact that that we are obtaining substantial results in this sense”?
Thank you!
Brokeeper
Gerard McEk:
Thank you for the suggestion, I take advice of it.
Warm Regards,
A.R.
Brokeeper:
1. yes
2. on the contrary, it costs less, due to higher economy scale. We will make assemblies of major power, but the “atom” will be the Mini-SKLep
3. one line is for the Mini-SKLeps, another for the assemblies
Warm Regards,
A.R.
Dear Andrea,
1.Is Leonardo Corp. and your partners prepared for the massive numbers of orders once the ECat is released upon an unsuspecting green
energy starving world?
2.Will not manufacturing costs and efficiency of ten 10W mini ECat SKLeps be significantly more than manufacturing one 100W ECat SKLep?
Will that same ratio cost/efficiencies differences carry over to higher/lower 10 magnitudes of size and power that follows in the
future – like the 1W Ecats, 1kW
Ecats, etc.……?
3.Will different power ECat SKLeps be assembled on the same line or separate lines?
With much respect,
Brokeeper
Dear Andrea,
The latest information you shared, showing the lamp that is powered by the mini SKLep only using 1.8 mW is quite interesting. I hope you will reach the million preorders soon so we can finally expect the Ecats on the market and use this miracle.
I just want to share with you my latest hobby, which is riding an EUC (an electric Unicycle). I believe it is one of the most efficient vehicles that exist. It uses only 13.5 Wh/km over the more than 2500 km I drove with it since mid november last year.
I still hope you still try to get the SKLep to run on batteries without earthing. If that would be possible I could run the EUC without re-loading the battery on mains on only two mini SKLep’s forever!
Maybe also an hobby for you, I strongly recommend it. See: “72 year old guy learned to ride an EUC”
https://youtu.be/t4S0steKSrQ
Kind regards, Gerard
Martin Nagl:
I prefer to keep this information confidential, until we reach the target. Pre-orders are growing, though, notwithstanding the vetting selection
Warm Regards,
A.R.
Frank Acland:
The Fluke Amperometer is almost stable: +/- 0.00003 W we can read
Warm Regards,
A.R.
Steven Nicholes Karels,
When you go to the fourth and fifth decimal oscillations happen based on the demand of the Ecat, that depend from many internal factors that are confidential.
Warm regards,
A.R.
@Lars Olov
If you can afford you could buy a system with at least the double level of your average kW need.
This should handle most of your peak loads while it exports the
over-production back to the grid. Just like normal practice for most solar systems.
And just like for a solar system: the larger system, the shorter the payback time
and the more profit thereafter.
Of course, you must first get approval from your network supplier and follow all local rules.
Lars Olov,
There are at least three ways to compute the required amount of eCat power to buy for your residence.
1. Measure or calculate the lowest power consumption in your residence. Then all the eCat-generated power will go to reduce your electric bill and the saving will be at the maximum rate that you are charged.
2. Calculate the average daily energy consumption for your home. It will vary over the year. Buy enough eCat-generated power for the average consumption. The excess energy will go out to the electrical Grid and you may get nothing for the excess or a small portion of your rate returned to you.
3. Calculate or measure the peak energy consumption for your residence. Purchase that amount of eCat-generated power and the excess will go into the Grid. You will receive none or little for the excess energy going onto the Grid but you are helping to save the world.
Dear Readers:
IMPORTANT MESSAGE
We have been informed that somebody is selling the Ecat SKLep and the Mini Ecat SKLep, using order forms that are not ours.
Please read carefully what follows:
1- WE ACCEPT ONLY PRE-ORDERS MADE BY THE PRE-ORDER FORM PUBLISHED IN http://WWW.ECAT.COM AND IN http://WWW.ECATORDERS.COM AND ANY OTHER FORM WILL NOT BE ACCEPTED
2- WE ARE NOT ACCEPTING PAYMENTS FOR THE ECATS OF ANY KIND, BECAUSE WE WILL DELIVER THEM ONLY IF WE WILL COLLECT ORDERS FOR AT LEAST 1 MILLION UNITS
AS IT IS CLEARLY WRITTEN IN OUR PRE-ORDER FORM
3- IF ANYBODY ASKS YOU TO PAY ANY PRICE TO RECEIVE THE ECAT, ATTENTION, IT IS A FRAUD, BECAUSE WE WILL ASK PAYMENT ONLY WHEN WE WILL CONTACT OUR CLIENTS
TO DELIVER THE PRE-ORDERED ITEM: ONLY AT THAT POINT THE PRE ORDER WILL BE TURNED INTO A REGULAR ORDER, AND ONLY IF THE CLIENT WILL STILL WANT IT
4- ANY “ORDER FORM” IS FAKE, BECAUSE WE DO NOT ACCEPT ORDERS YET, WE ONLY ACCEPT PRE-ORDERS AT THE CONDITIONS CLEARLY EXPLAINED IN THE PRE-ORDER FORMS
5- IF YOU RECEIVE ORDER FORMS OR PRE-ORDER FORMS DIFFERENT FROM THE ONES PUBLISHED IN OUR WEBSITES, PLEASE FORWARD THEM TO:
info@leonardocorp1996.com
WE WILL PASS THEM ON TO OUR LEGAL STAFF.
Warm Regards,
Dr Andrea Rossi, CEO
Leonardo Corporation
If I want to buy the best possible amount of ecatpower compared to my consumtion, how should I think and calculate? If I buy more than my avarage it will only be good at the top consumtion, or how should one think?
Dear Andrea Rossi,
One of your previous posts indicated separate but identical measurements for the Mini-SKLep with the same lamp. The Mini-SKLep provides 5 W of power to the LED lamp. Your previous post identified an input voltage of 10.0 VDC and an input current pulse of 1/3 second every 8 – 10 seconds with a measured current level of 0.00018 Amps.
Calculating the COP for this statement, we assume an average time between pulses of 9 seconds. So, the lamp consumed energy is 45 Joules (9 seconds * 5 W).
The energy sent to the Mini-SKLep is 1/3 second * 10 V * 0.00018 Amps = 0.0006 Joules
The COP = Energy Out / Energy in = 45.0 / 0.0006 = approximately 75,000.
Note: This is different than the previously published value of 25,000. Is this because the measured current was averaged over one second? Please clarify.
Dear Andrea,
Interesting report of the readings with the Fluke meter. Is the 0.00018 A constant or does it vary somewhat, if so, how much?
Sincerely,
Frank Acland
Dear dr. Rossi,
how many orders are missing to reach the 1M target?
Best regards
Martin Nagl
Silent Majority Guy:
Thank you for your support,
Warm Regards,
A.R.
Stephen:
Curious, but I didn’t notice any difference between Sundays and the other days. The temperature is almost the same every day, as well as humidity and power use.
It goes always, as we observed, with an average of 0.000 A for 8 to 10 seconds and with 0.001 A for about 1/3 of second. The oscillations depend on the demand of the Mini Ecat SKLep.
For the curiosity of our Readers: we are making the same measurements with another Mini Ecat SKLep, for other reasons, and we are making the measurements of current with a FLUKE amperometer that measures also the fourth and fifth decimals, and the result is: A= 0.00018 A, with 10 V, same light.
Warm Regards,
A.R.
Luna:
Thank you for your concern.
I made ( and make ) every day 15 minutes of logopedy exercises.
Warm Regards,
A.R.
Darko:
Confidential,
Warm Regards,
A.R.
Bob Fast:
1. yes
2. yes
Warm Regards,
A.R.
Tom Conover:
Your pre-order has been received
Warm Regards,
A.R.
Dear Andrea Rossi,
I am trying to determine total electricity my home consumes on a continuous basis and purchase enough SKLep units to cover this amount (or perhaps slightly more).
1. Will it be possible to hire a qualified electrician to install a sufficient quantity of SKLep units at my home breaker box to cover this base load requirement of my home?
2. If so, will power for my house be drawn from the mains only when total load exceeds the maximum output of the installed SKLep units?
Thank You,
Bob Fast
Dear Dr. Rossi,
How many firms have contacted you regarding possible licensing of your technology?
Best regards,
D.
Dear Dr Andrea Rossi,
Watching your interview to Frank Acland, whose link is under the youtube video
https://youtu.be/tYHSR_HQwNI
I saw you healthy and with your normal voice…much better that we watched and heard at the presentation of the Ecat SKLep in Miami about two years ago, where you were almost voiceless after the throat surgery: how did you recover so well from a so bad situation ?
Best
Luna
@Jan Šrajer
Ecat piccolo –> Gattino
Ecat grande —> Gattone
😀
Piergiorgio
Dear Andrea,
I placed an order for 20 units, I didn’t get any confirmation email. Have other buyers recieved confirmation emails? Let me know if it shows in your order list please?
Warm Regards,
Tom
Dear Andrea Rossi.
It’s interesting how the PSU current in the live stream seems more steadily 0.000 on Sundays
I wonder if this is correlated to something.
Maybe temperature? Humidity? Other power use?
I did wonder if it might be correlated to the PF in the mains supply power. Either it’s value or variability. And if so if understanding it might help you get to grips with why the mains connection is currently needed and hopefully resolve it.
It’s just a thought. I don’t expect an answer.
It’s curious behavior tbough.
Best Regards
Dear bloggers,
to help Leonardo reach the target of preorders for 1 million units it is useful to turn viral the view of the youtube video
https://youtu.be/tYHSR_HQwNI
To make this is not difficult if each of us makes 20 persons view it and incourage them to pass the parole so that every following viewer generates ten new viewers; see what happens:
20 persons generate 10 viewers each = 200 viewers
200 persons generate 10 each = 2000 viewers
2000 generate 10 each = 20000 viewers
20000 generate 10 each = 200000 viewers
200000 generate 10 each = 2 millions of viewers (ALLELUJAH)
The video shows a product that is extremely convincing: light basically for free, while the fees to pay energy are skyrocketing, therefore I assume that 2 milllion viewers will buy, even only for curiosity, an average of 1 Mini Ecat SKLep each.
Instead of harassing Andrea to anticipate the deliveries, which is impossible, why don’t we just help him to find 10 viewers each, inviting a pass parole to all the following steps ?
Let’s GO !
I am starting now.
Silent Majority Guy
Greg Leonard:
Please send your pre-order update to
http://www.ecatorders.com
or to
http://www.ecat.com
The new pre-order will conserve the priority date of the former one,
Warm Regards,
A.R.
Dear AR,
I understand my existing order for 1 SKLep DC/DC will be replaced with 10 miniSKLep and one mains power adaptor.
I am extending my order to Twenty miniSKLep, covering another project, and some gifts to family and friends. The gifts will be single miniSKLep – each needing a power adaptor.
Project MiniSKLep Power adapter
Previous order 10 1
Gifts*6 6 6
48V project 4 1
This gives a total of 20 MiniSKLep and 8 power adapters.
My question is:
How do I show this on my updated order?
regards,
Greg Leonard
Joe:
We will accept these kinds of payment: Paypal, credit cards, bank wires, checks.
Obviously in our invoices will be also indicated the directions to pay by bank wire.
Warm Regards,
A.R.
Dear Dr. Rossi,
due to the company policy of paypal to fine customers with 2,500$ for so-called “misinformation” e.g. at social networks i do not want to risk my money and will never open a paypal account. Will you make public your IBAN and BIC before the delivery will start?
Best regards
Joe
Dear @Jitse
there is no need to waste money for a 12 kwh battery. As Dr. Rossi already answered it is possible to use just ecats. Just electricy which is needed over the installed power of ecat will be taken from the grid. So everyone should buy more ecat skl instead to waste money for batteries.
The EU is just a vasall of USA and will do what the ruling class of the USA (owners of oil, gas companies, finance groups) want to. China needs much energy, it buys from USA, Russia, Iran, Venezuela.. and this country is not ruled by billionaires. Also it is not possible for the western elite to coup or attack China, like they have done in Iraq, Libya, tried in Syria..
Best regards
R.Brand
@Italo R.
In this overview you will see all average electricity prices in the world, in March 2022: https://de.globalpetrolprices.com/electricity_prices/#hl121 (also for fuel and gas)
Up to now and above all in next year it is more expensive.
In Germany the costs for new customers (without an old contract) is about 55 to 98 ct/kwh.
But the house connection for electricity is normally limited to 14.5 KW, for those who heat with electricity to 34 KW.
Best regards
Michael
Dear R.Brand,
Maybe you are right in the first paragraphs (up to Any country) then it’s better to transfer all Ecat production to Europe.
With 3 KWh EcatSKLep and a 12 kWh battery We can completely decouple both grid: gas and electricity, (at home or only 6 kWh EcatSKLep), making my house completely self-supporting. Dear R.Brand, Maybe you are right in the first paragraphs (Any country) then it is better to transfer all production to Europe. With 3 KWh EcatSKLep and a 12 kWh battery I can completely decouple both grid: gas and electricity at home (or only 6 kWh EcatSKLep), making my house completely self-supporting. This could, for example, make all Dutch houses completely independent of networks in a few years.
(2nd paragraph) China does not seem to me be a good solution yet.
This could, for example, make all Dutch houses completely independent of al networks in a few years?
(2nd paragraph) China does not seem to me to be a good solution yet.
Sincerely, Jitse.
Ambra:
Page 69, in particular lines 18 and following: a veritable Occam’s razorade
Warm Regards,
A.R.
Dear Andrea,
I am reading the book you suggested “Unified Field Theory and Occam’s Razor” of Giorgio Vassallo et Al.
Can you suggest me the most important page of the book in relation to your work ?
Italo R.:
True, and in all Europe the situation is the same, if not worst,
Warm Regards,
A.R.
Dear Doctor. Rossi and Readers:
Just to let you know. Here in Italy the total effective cost of my domestic electricity is around 0.19 euros / kWh. The total power available from the grid has been reduced last month from 3.1 kW to 2.6 kW to force users to reduce consumption.
Regards,
Italo R.
Steven Nicholes Karels:
Please remake the pre-order form here
http://www.ecat.com
Resend it specifying that your former pre-order must be cancelled.
You will conserve the priority date of the former order,
Warm Regards,
A.R.
@Jitse
Unfortunately you are wrong. It would be the worst solution for the bourgeoisie of USA. e.g. With every fracking-LNG tanker to europe the USA makes 200 million $ profit, look also at the coups like Libya, the terror attack at Nordstream they made therefore… Everywhere, in nearly all countries their oil companies are participating. Countries in where they do not participate have to live under USA sanctions.
Every country (just the rich) with big oil companies, gas companies are the losers.
Therefore would be the people’s republic of China a good country which can lead. Then all other countries have no other option to follow and use the technology of ecat, because oil and gas are not competitive.
Best regards
R.Brand
Dear Andrea Rossi,
If the Mini-SKLep will be the common component for the 100W class of SKLep units, I would like to change my order from 30 100W SKLep units to 360 10W Mini-SKLep units, configured for an output of 12VDC and 360W. How do I make that happen?
Dear bloggers,
The simplicity of production and distribution of the EcatSKLep (10 W, 100 W or 1/2 MW containers) makes it the best competitor for all other energy sources.
There are no risks such as radiation, and the electricity grid no longer needs to be expanded.
By quickly realizing large Ecat factories, they create a strong response to natural gas producers and oil companies.
For Europe and the United States, this is far the best solution to the current energy problems.
Kind regards
Jitse
Steven Nicholes Karels:
Thank you for your insight,
Warm Regards,
A.R.
Calle H:
I think so,
Warm Regards,
A.R.
Dear Dr. Rossi,
There was an interesting article in Swedish media some days ago where Elon Musk say: by far the greatest danger facing civilization is energy supply and too few babies. Question: Is there no way you can speed up the E-Cat and take it to the spring board and jump off?
Kind regards,
Calle H
Dear Andrea Rossi,
Extending the analysis I previously made to a lifetime of 11 years, I then did a Ragone plot on the specific power and energy densities of the mini-SKLep. It appears slightly superior to any other kind of energy source. Therefore, the energy density, if it can last that long without degradation, seems in the range of nuclear or similar reactions.
Weleda:
Thank you for your attention to the work of our Team
Warm Regards,
A.R.