United States Patent US 9,115,913 B1

Read the whole US Patent
Download the ZIP file of US Patent

47,861 comments to United States Patent US 9,115,913 B1

  • Andrea Rossi

    Richard:
    1- a: yes; b: optional; c: yes
    2- a: no; b: yes, but only with assemblies above 1 MW with the application of the ORC ( Organic Rankine cycle ) or with Carnot Cycle, depending on the power and the situation
    Warm Regards,
    A.R.

  • Richard

    Dear Mr. Rossi,

    Is it correct
    1. the non SSM version needs a stable power source like
    a. Grid?
    b. Battery + Solar?
    c. Generator?

    2. In case the power source is ok then NGU can charge
    a. Batteries?
    b. Run any application?

    Please clarify. Thank You.

    Best regards, Richard

  • DrLG

    Dear Dr. Rossi
    Thanks for the confirmation that a non-SSM ECAT can operate using a portable gas generator to supply the power to the ECAT.

    Follow up question, can a non-SSM ECAT use power from a non-SSM ECAT that gets its power from a portable gas generator?

    Regards, DrLG

  • Andrea Rossi

    DrLG:
    1- yes
    4- depends on the situation
    Warm Regards,
    A.R.

  • DrLG

    Hi Dr. Rossi
    1)Can the non-SSM ECAT operate using A/C power supplied by a portable gas generator?
    2) if not, is this because it needs a better earth ground than a portable gas generator?
    3)if not, if you supply an earth ground to the gas generator, such as a rod in the ground, will it work then?
    4) if it can us such a generator, then maybe mobile use is possible for non-SSM version if the unit (say a train) has an auxiliary source of power to run the ECAT? Or, for the train, the rails might provide any needed ground.
    Regards, DrLG

  • Andrea Rossi

    Steven Nicholes Karels:
    Theoretically yes, but only in collaboration with the manufacturer of the vehicles,
    Warm Regards,
    A.R.

  • Steven Nicholes Karels

    Dear Andrea Rossi,

    Your responded with
    “Thank you for your support: IF we will confirm the SSM, that will be possible,”
    to a question of applying NGY SSM technology to electric trains.

    1. Does your response mean that, if SSM issues are resolved, then NGU technology may be used for transportation applications?
    2. Trains
    3. Buses
    4. Commercial trucks
    5. Automobiles?

  • Andrea Rossi

    Lucio Martini:
    Thank you for your support: IF we will confirm the SSM, that will be possible,
    Warm Regards,
    A.R.

  • Lucio Martini

    Dear Mr. Rossi,
    I wonder if there is a future in which trains could run on electric motors powered by the E-Cat system—electric trains that do NOT REQUIRE overhead power lines.

  • Andrea Rossi

    Svein:
    Thank you for your insight,
    Warm Regards,
    A.R.

  • Svein

    Dear Andrea,

    Since you have explained that the SSM and non-SSM Ecat are based on the same fundamental ZIAE principle, this is my observation.

    If the SSM may not be ready to be presented at the Global Presentation, but the non-SSM Ecat is presented with the necessary independent third-party verification, I would still consider this to represent the achievement of the great majority of your fundamental objectives.

    An Ecat operating at this level could already have enormous significance for its users.
    It would be somewhat like the Fiat 500: perhaps not the most advanced version of the technology, but a simple and practical product capable of changing nearly everybodys everyday life.

    We all know that more advanced and exclusive versions normally come after the fundamental principle has been successfully established.

    For this reason, I see the non-SSM Ecat not as a failure to achieve the ultimate goal, but as a potentially very important first generation of the technology.

    I think this mat be a very positive outcom of the Global Presentation.

    Warm regards Svein

  • Andrea Rossi

    Augustin:
    So far, this information is restricted,
    Warm Regards,
    A.R.

  • Augustin

    Interesting; and which are the differences between the SSM Ecat and the non-SSM Ecat that allow the SSM to power itself and a load at the same time ?
    Augustin

  • Andrea Rossi

    Svein:
    ZIAE is a theoretical cathegory that includes all the Ecats; SSM differs from the not-SSM substantially, but both belong to the cathegory of energy generators exploiting the ZIAE, like, for example, the engine of a Formula 1 racing car and the engine of a Fiat 500 are completely different things, but both belong to the cathegory of internal combustion engines,
    Warm Regards,
    A.R.

  • Svein

    Dear Andrea,

    Since you have now defined the Ecat process as ZIAE (Zitterbewegung Induced Anomalous Energy), I have a question concerning the relationship between the SSM and the non-SSM Ecat.

    1- Is the underlying ZIAE energy-production principle essentially the same in the SSM and non-SSM versions, with the difference mainly being in how the process is sustained or controlled?

    2- Or is the ZIAE process itself fundamentally different between the two versions?

    Regards Svein

  • Andrea Rossi

    Arina:
    Yes, thanks to God, I can regularly practice tennis, swim, skiing, jogging, quintessential for my brain and body necessary for my job,
    Warm Regards,
    A.R.

  • Arina

    Dr Rossi,
    do you still find the time to play tennis ?
    Arina

  • Andrea Rossi

    Svein:
    Thank you for your suggestion,
    Warm Regards.
    A.R.

  • Andrea Rossi

    Axil:
    No problem,
    Warm Regards,
    A.R.

  • Axil

    Thank you for clarifying. I had assumed that the mechanisms discussed in your published theory paper were open for scientific discussion, and I did not realize that my question touched on information you regard as restricted.

  • Svein

    Dear Andrea,

    Since you have stated that the Ecat has an internal AI developed by your team, and that regular production is targeted for January/February 2027, I have been thinking about one aspect that may be important at this stage of the design.

    The Ecat should not merely be designed to connect to the grid. It should be designed to cooperate with the grid.

    If the Ecat is to become a widely distributed energy source, its internal control system could make this a major advantage. The AI could potentially regulate production according to local consumption and grid conditions, reduce output when local voltage or network capacity requires it, and manage surplus production intelligently.

    For a modular Ecat, for example 6 kW consisting of 60 × 100 W modules, fine-grained control could potentially provide very precise regulation.

    I also think the control architecture should consider the complete sequence of grid-connected operation, safe separation during a grid failure, GFM operation during islanding where supported, synchronization when the grid returns, and then a return to GFL operation.

    The basic safety functions should remain local, without depending on continuous communication with an external system. An app could give the prouser a clear view of production, consumption, grid exchange and the reason for any production limitation, while the AI handles the technical control automatically.

    Electricity price could be an additional optimization signal, but always below safety, grid stability and local energy balance.

    This would give the Ecat a very different role from an uncontrolled generator:
    Distributed energy production could become distributed grid regulation.

    For me, the key message to network companies would therefore be:
    Don’t ask the grid to adapt to Ecat. Design Ecat to cooperate with the grid.

    I believe this would be very valuable to demonstrate at the Global Presentation.

    Regards Svein

  • Andrea Rossi

    Richard:
    In January/February 2027 the deliveries will be started,
    Warm Regards,
    A.R.

  • Richard

    Dear Dr. Rossi,

    Do you have, at this time, a target date, or target date range, for the beginning of regular production of Ecat units for distribution to those of us who have placed pre-orders and, if so, can you tell us what that date is? Thanks.

    Richard

  • Andrea Rossi

    Axil:
    Thank you for your insight.
    Answers:
    1- this information is restricted
    2- I cannot answer in positive or in negative
    Warm Regards,
    A.R.

  • Andrea Rossi

    Axil:
    Thank you for your insight.
    Answers:
    1- no
    2- no
    Warm Regards,
    A.R.

  • Axil

    To add to my previous question as follows:

    Your theory identifies the coherent electron cluster as a highly ordered, very-low-entropy state formed under nonequilibrium conditions, and you have also discussed Casimir effects and localized vacuum polarization. Thermodynamically, however, sustained energy transfer requires that the relevant difference between states be continuously maintained. Does the low-entropy coherent electron state in your model create a Casimir-like difference between the local electromagnetic vacuum state and the surrounding vacuum? If so, what mechanism continuously regenerates that difference as energy is transferred, preventing the system from simply reaching equilibrium?

  • Axil

    Dr. Rossi,

    I have a thermodynamic question concerning the source of the energy produced by the E-Cat.

    Sustained energy transfer requires a difference between two physical states. When the relevant states reach equilibrium, there can be no continuing net flow of energy between them.

    The Casimir effect provides an established example involving the electromagnetic vacuum. By changing the electromagnetic boundary conditions, a Casimir structure creates a local field state whose energy differs from that of the surrounding reference state. However, the conventional Casimir effect does not provide continuous power, because once the system reaches its lower-energy configuration the process stops, and restoring the original configuration requires energy.

    Therefore, if the E-Cat obtains sustained energy from the vacuum, there would appear to be an additional thermodynamic requirement: some physical process must continuously create or maintain a difference between the local vacuum state associated with the coherent electron system and the surrounding vacuum state.

    What physical mechanism in your theory creates and continuously maintains this nonequilibrium condition while power is being produced?

    Is a Casimir-like or dynamical-Casimir-like modification of the electromagnetic vacuum involved, and if so, what continually maintains or regenerates that difference so that energy flow can continue?

    Warm Regards,
    Axil

  • Andrea Rossi

    Giacomo:
    Yes, so far,
    Warm Regards,
    A.R.

  • Giacomo

    SSM: still in good standing ?

  • Andrea Rossi

    Ecat Enthusiast:
    You must make a distinction: the ZPE ( Zero Point Energy) is an energy that is exploited by the ZIAE (Zitterbewegung Induced Anomalous Energy), that is the process to exploit it,
    Warm Regards,
    A.R.

  • Ecat Enthusiast

    Dr. Rossi:
    Now you have described the Ecat reaction as ZIAE (Zitterbewegung Induced Anomalous Energy), do you no longer think it is ZPE (Zero-Point Energy)?
    Regards, Ecat Enthusiast

  • Andrea Rossi

    Steven Nicholes Karels,
    Thank you for the insight,
    Warm Regards,
    A.R.

  • Steven Nicholes Karels

    Dear Andrea Rossi,

    “A Ragone plot (/rəˈɡoʊniː/ rə-GOH-nee)[1] is a plot used for comparing the energy density of various energy-storing devices. On such a chart the values of specific energy (in W·h/kg) are plotted versus specific power (in W/kg). Both axes are logarithmic, which allows comparing performance of very different devices. Ragone plots can reveal information about gravimetric energy density, but do not convey details about volumetric energy density.

    The Ragone plot was first used to compare performance of batteries.[2] However, it is suitable for comparing any energy-storage devices,[3] as well as energy devices such as engines, gas turbines, and fuel cells.[4] The plot is named after David V. Ragone.[3]

    Conceptually, the vertical axis describes how much energy is available per unit mass, while the horizontal axis shows how quickly that energy can be delivered, otherwise known as power per unit mass. A point in a Ragone plot represents a particular energy device or technology.

    The amount of time (in hours) that a device can operate at its rated power is given by the ratio of its specific energy (Y-axis) to its specific power (X-axis). This relationship holds regardless of the device’s overall size, as a larger device would have proportional increases in both energy and power. Consequently, the iso curves (constant operating time) in a Ragone plot are straight lines.”

  • Andrea Rossi

    Steven Nicholes Karels,
    The price of the Ecat modules will be communicated at the presentation,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Axil:
    Thank you,
    Warm Regards,
    A.R.

  • Svein

    @Richard

    To avoid the anomalous comparison A.R. points out, I will not continue with calculations comparing an energy-producing system with an energy-storage system.

    I will simply point to what I see as the fundamental issue:
    The world today has an energy shortage — not a battery shortage.
    My conclusion is therefore:
    Larger battery: ties up more capital in storage and does not produce any additional energy.

    Larger Ecat: increases your continuous energy production, providing coverage of your own consumption and the possibility of earning revenue from surplus electricity exported to the grid.

    Small batteries still have important functions for short-term storage, peak loads, UPS, motor starting and island operation.
    But when the primary system produces energy continuously, I see little reason to make investments in battery banks.

    Increase continuous energy production — avoid unnecessary battery use.

    I would like to see this in EVs too!

    With energetic regards Svein

  • Axil

    Dr. Rossi,

    An experimental test has been proposed to Sveinn Ólafsson that may be relevant to an idea you raised in your 2019 paper concerning coherent, low-entropy electron clusters and the possible formation of a BEC-like coherent state.

    Sveinn’s recent experiments have detected X-ray emission from activated hydrogen/Rydberg-matter systems. I have proposed testing whether these X-rays originate directly at the activation region or whether a propagating intermediate state travels away from the source and subsequently produces energetic electrons and bremsstrahlung X-rays.

    The proposed test would use synchronized X-ray detectors at different distances. A second version would place an absorber between detectors to determine whether the measured downstream signal is ordinary transmitted radiation or whether an intermediate state can traverse matter and subsequently generate new X-rays.

    In my model, that intermediate state is an EVO and coherence is central to its formation. Importantly, the experiment does not require accepting that interpretation: both a positive and a null result would discriminate between mechanisms.

    It occurred to me that this experiment may provide an independent way of investigating the coherence/BEC direction that you first discussed in your 2019 theoretical work.

    If Sveinn decides to perform the experiment, I will let you know the result, whether positive or negative.

    Warm Regards,
    Axil

  • Steven Nicholes Karels

    Dear Andrea Rossi,

    Here is the conceptual design and hardware cost for a plug-in eCat NGU 1200W system.

    eCat NGU 100W units, 12 units required. Assume to cost a total of $4,800USD.

    1 Namunanee ABS enclosure, 19.7″ x 15.7″ x 7.9″, available on Amazon, $146USD

    1 Hoymiles HMS-1800-4T-NA microinverter, from CSA Solar USA, $352USD

    The Hoymiles is 96% efficient so the power output is 1,152W of continuous Grid power.

    4 each 4-foot 10AWG MC4 extension cable, cut in half to connect 3 100W NGU units (series) to one input of the Hoymiles microinverter.

    1 Hoymiles AC extension cable, $26USD

    1 NEMA 14-50 Plug, $16USD

    Total hardware cost is about $5,500USD, break-even period is about 30 months.

    Thoughts?

  • Andrea Rossi

    Jan:
    So far, yes,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Sam:
    Thank you for the link,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Genevieve:
    Thank you for your support,
    Warm Regards,
    A.R.

  • Jan

    Dr Rossi,
    Still up with the SSM energy revolution ?
    Jan

  • Sam

    Hello DR Rossi

    Interesting Article.

    https://share.google/Jv7nnOib261ZUTNIX

    Regards
    Sam

  • Genevieve

    Dr Rossi,
    Thank you for your prompt answer: Zitterbewegung Induced Anomalous Energy: I like it !
    Genevieve

  • Andrea Rossi

    Genevieve:
    1- no
    2- Zitterbewegung Induced Anomalous Energy: ZIAE
    Warm Regards,
    A.R.

  • Genevieve

    Dr Rossi,
    two questions:
    1- do you still include the Ecat technology in the cathegory of LENR ?
    2- if not, how would you define it ?
    Best
    Genevieve

  • Andrea Rossi

    Svein and Richard:
    Anyway, it is “anomalous” to make a comparision of energy density between a generator that makes energy with overunit COP (or, in case of SSM, COP infinite) with a generator that makes energy with COP underunit,
    Warm Regards,
    A.R.

  • Svein

    Richard,

    I think the comparison becomes particularly interesting when we include operating time.

    Rossi has previously indicated a volumetric power density of approximately 0.27 kW/litre for a 1 kW Ecat assembly. This means that 1 kW would occupy approximately:

    1 / 0.27 ≈ 3.7 litres. If that 1 kW Ecat operates for 100,000 hours, it produces: 100,000 h × 1 kW = 100,000 kWh
    over its operating life.

    A modern lithium-ion battery may have a volumetric energy density of approximately 0.5 kWh/litre at cell level.
    A battery occupying the same 3.7 litres would therefore store approximately: 3.7 litres × 0.5 kWh/litre = 1.85 kWh
    per full charge.

    Now the difference becomes quite striking:

    100,000 kWh / 1.85 kWh ≈ 54,000

    So, using these figures, the same volume of Ecat would produce approximately 54,000 times as much energy over 100,000 operating hours as the battery could store in a single full charge.

    Of course, the battery can be recharged many times, so this is not a comparison of total lifetime energy throughput of the two technologies.
    It is a comparison between the Ecat’s lifetime energy production and the battery’s energy storage capacity per charge.

    And that is precisely why I think an Ecat should not primarily be compared with a battery as though they were competing forms of energy storage.

    The battery stores energy. The Ecat produces energy.

    The final comparison will of course depend on the actual Ecat dimensions and specifications that Rossi has said will be provided in the datasheet at the presentation.

    Regards Svein

  • Andrea Rossi

    Richard:
    The datasheet with weight and dimensions of the Ecat will be disclosed at the presentation,
    Warm Regards,
    A.R.

  • Richard

    Dr Rossi,

    On July 18, 2026 you responded to my inquiry about the power output of an ecat, as compared to that of a lithium battery, by stating that, “A battery has a much higher weight per W than the Ecat.” How does the power output of an ecat compare to that of a lithium battery in terms of its physical volume? Thanks for addressing this question.

    Richard

Leave a Reply

You can use these HTML tags

<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>