United States Patent US 9,115,913 B1

Read the whole US Patent
Download the ZIP file of US Patent

47,861 comments to United States Patent US 9,115,913 B1

  • Nils Fryklund

    Dear Andrea!
    What COP, approximately, is it for the simpler E-cat to resistive resistance, such as house heating and hot water?
    Best regards
    Nils Fryklund

  • Richard

    Dr. Rossi,

    Has either ecat, SSM or non-SSM, progressed, in terms of output and reliability, to the point that it can meet some or all of Leonardo Corp’s own power requirements? Thanks.

    Richard

  • Andrea Rossi

    Arnoldo:
    I do not think so; by the way, we do not have politic connections,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Svein:
    The algorythm is too complex to answer; we count on achieving Sigma 5 within this year,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Arnab Saha:
    Yes,
    Warm Regards,
    A.R.

  • Arnab Saha

    Dr Rossi,
    Has your SSM unit obtained the necessary certification ?
    Thank you if you can answer,
    Arnab Saha

  • Svein

    Dear Andrea,

    Now that you have stated that the SSM has reached a Sigma level between 3.5 and 4, I have one question:

    To reach Sigma 5, does the present Ecat core mainly require further measurements and accumulated operating time, or do you expect that changes to the core design will be necessary?

    I am asking because these two paths could obviously have very different implications for the time required to reach Sigma 5.

    Warm Regards Svein

  • Arnoldo

    Dr Rossi,
    Do you think that politics could be important for the success of the Ecat ?
    Arnoldo

  • Andrea Rossi

    Axil:
    1- no
    2- yes
    3- this information will be given at the presentation of the product
    Warm Regards,
    A.R.

  • Axil

    Dear Dr. Rossi,

    During the development and testing of the E-Cat NGU, have you experienced any significant electrical or electromagnetic interference (EMI) affecting nearby electronic equipment, instrumentation, communications, or control circuits?

    Also, has the current NGU product completed certification or safety testing by UL (Underwriters Laboratories), or another recognized independent certification laboratory? If so, can you say which certification or standard applies?

    Thank you for considering these questions.

    Best regards,
    Axil

  • Andrea Rossi

    Steve D:
    The Ecat SSM ( IF… ) is a generator of electricity 110/220 V 60/50 Hz and you can plug to it whatever you want, provided the load does not overcome the Ecat’s power,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Rick 57:
    c
    Warm Regards,
    A.R.

  • Steve D

    Dear Andrea Rossi

    Your answer to my previous question is suggestive of the Ecat non SSM providing different voltage outputs. Is it possible that the Ecat can easily substitute the mains drive to an existing resistive heating element of a boiler/ heater taking into consideration the 120V and 240V types in use? The question is principally about existing heating element compatibility. Not to be overlooked is the integration of power source, thermostat regulation and fan where applicable.

    Thank You

  • Rick 57

    Dear Andrea,
    can you tell us which sigma level did you reach right now:
    a) less than 3
    b) between 3 and 3.5
    c) between 3.5 and 4
    d) between 4 and 4.5
    e) more than 4.5
    Thanks a lot
    Riccardo

  • Andrea Rossi

    Yury E.:
    Thank you for the suggestion and the information,
    Warm Regards,
    A.R.

  • Yury E.

    Dear Dr. Rossi!

    My proposal for intermediate conversion of the ECat cell’s primary electricity into hydrogen was based on the following considerations.

    To obtain a high electrical output, it is necessary to combine the power of a large number of elementary ECat sources.

    If the power of a basic ECat cell is 100 W, then, for example, to obtain an electrical output of 10 kW or 100 kW, 100 and 1000 cells, respectively, would be required. This significantly complicates and increases the cost of the DC-DC or DC-AC converter system and its control.

    This does not solve the problem of storing electrical energy, for example, in electric vehicles and in many real-world systems. Furthermore, an energy storage system will inevitably be needed for the initial start-up of the ECat, as well as for repeated start-ups and shutdowns during domestic use. Obviously, an energy storage system is also needed for SSM operation.

    Adding an electrical energy storage system in the form of lithium batteries to a system, such as a car or a high-power consumer, would add tens or hundreds of kilograms and complex electronics.

    However, it is possible to combine the generation and storage of ECat’s output electrical energy by intermediately converting the primary electricity from the ECat cell into hydrogen. This would eliminate the need for a complex electrical power summing system with inverters, a complex battery system, and so on.

    It is also important to note that electrolysis places virtually no special requirements on the quality of ECat’s electricity.

    Since the hydrogen fuel cell produces pure H2O as its output, ECat will clearly be a desirable energy source for many countries where the need for clean water is urgent.

    Sincerely,
    Yury

  • Andrea Rossi

    Casey:
    Thank you,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Alex:
    Yes,
    Warm Regards,
    A.R.

  • Alex

    Will the Ecat be usable also to heat apartments ?

  • Casey

    Dr Rossi,
    The home page of http://www.drandrearossi.com is very important, the rest of it is very interesting,
    Casey

  • Svein

    To the readers of JoNP,

    Several of us have expressed a wish to see the Ecat used in mobile applications.

    The Ecat is apparently still a somewhat delicate instrument which, for the time being, may be best suited to remain stationary — for example in a home.

    But this is hardly a limitation when we consider the size of the potential stationary market.
    There must be more than one billion homes in the world. At a price of approximately $4,000 for a 1 kW Ecat, this represents a potential market of at least $4 to $10 trillion.

    After that comes industry, which may be better served when larger Ecat units than the 100 W module are available.

    Homes connected to an electricity network already have an ideal energy storage and security infrastructure available to them, provided the Ecat and the grid are integrated intelligently.

    This is why I tend to agree with Andrea Rossi that, at the present stage, mobile Ecat applications should be developed together with the industries that will use them.

    Rossi already has enough to deal with in developing the primary market — a potential more than $4 trillion residential market.

    The Ecat does not appear to lack potential customers. The immediate challenge is to establish the production capacity required to serve them.

    And I believe that close cooperation with electricity network companies will be essential.

    As for hydrogen, the infrastructure is not something that would have to be invented from scratch. ISO 19880-1 already provides requirements and guidance for hydrogen fuelling stations, including on-site hydrogen production by water electrolysis, hydrogen storage, compression and dispensing.

    This makes the possibility of using a stationary non-SSM Ecat as a continuous hydrogen producer worth considering.

    Warm Regards Svein

  • Andrea Rossi

    Steven Nicholes Karels:
    Yes, the Ecat must stay in upside and stable position, inside a room,
    Warm Regards,
    A.R.

  • Steven Nicholes Karels

    Dear Andrea Rossi,

    If SSM issues are resolved, is there still a tilt limitation with NGU reactors?

  • Andrea Rossi

    Steve D:
    Depends on the specific situations,
    Warm Regards,
    A.R.

  • Steve D

    Dear Andrea Rossi

    Is there a variation in Ecat non SSM electrical output specifications offered to heavy industry to that offered to the domestic market? Or there is no difference?

    Thank You

  • Andrea Rossi

    Brokeeper:
    The problem of vibrations in an EV is not difficult to be resolved; in the test of Latina there was a perfectly flat racetrack and the vibrations were not an issue; the problems are much more complex and must be resolved in collaboration with the manufacterers interested to the Ecat,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Axil:
    Thank you for the information,
    Warm Regards,
    A.R.

  • Axil

    https://www.youtube.com/watch?v=568-39aOZkw
    
    Birefringence as a Possible Test of EVO Magnetism
    
    Birefringence may provide a useful way to investigate whether an EVO produces a real magnetic field.
    
    Birefringence occurs when light passing through a region behaves differently depending on its polarization. There are many ordinary causes of this effect, including stress in materials, plasma, electric fields, magnetic effects, surface structure and optical anisotropy. Therefore, observing birefringence by itself does not prove anything unusual about an EVO or the vacuum.
    
    The interesting possibility arises when birefringence is combined with independent magnetic and optical measurements.
    
    In the Vacuum Reaction model, an EVO is proposed to contain an exciton-polariton condensate. Polariton condensates can possess an organized collective spin state. My hypothesis is that when many polaritons—and potentially multiple EVOs—act coherently, their collective spin organization may be connected with the production of a real magnetic field.
    
    That last connection is important because it has not yet been demonstrated. The effective magnetic fields used in polariton physics are not automatically the same thing as an ordinary magnetic field that can be measured outside the condensate.
    
    This gives us a straightforward experiment.
    
    Measure the magnetic field around an EVO while simultaneously measuring its optical emission and polarization. At the same time, pass a separate polarized probe beam through or close to the region surrounding the EVO and look for changes in the polarization of that light.
    
    The electrical current producing the spark must also be measured at exactly the same time.
    
    This is important because every spark produces an ordinary magnetic field. We are not interested merely in detecting the magnetic field of the spark.
    
    The interesting result would be a magnetic effect that behaves differently from the spark current—for example, the spark ends but the magnetic signal continues for some measurable period.
    
    If a birefringence signal also continues during that period and rises and falls with the independently measured magnetic field, the observation becomes considerably more interesting.
    
    This also provides an important warning about interpreting birefringence.
    
    Conventional physics predicts that an extremely strong magnetic field can alter the optical properties of the vacuum itself. However, this effect is extraordinarily small at ordinary laboratory magnetic-field strengths. Therefore, easily visible birefringence around an EVO should not immediately be identified as vacuum birefringence.
    
    Material stress, plasma, electric fields, deposited material, surface changes and ordinary magneto-optical effects would first have to be eliminated.
    
    This consideration also applies to the polarization-sensitive tracks reported in some EVO and strange-radiation experiments. A permanent track that becomes visible through a polarizer demonstrates that the material has acquired polarization-sensitive optical properties. It does not by itself demonstrate that the EVO produced vacuum birefringence while making the track.
    
    The stronger experiment is therefore to make several measurements at the same time:
    
    spark current, magnetic field, EVO light, EVO polarization, and birefringence of an independent probe beam.
    
    Then watch the timing.
    
    Does the magnetic field disappear when the spark ends?
    
    Does it continue while the EVO remains active?
    
    Does the birefringence appear and disappear with the magnetic field?
    
    Does the polarization of the EVO change with the magnetic response?
    
    And when the EVO apparently becomes dormant, do these effects disappear and then return when another spark reactivates it?
    
    If these independent measurements repeatedly move together, while ordinary electrical, plasma and material explanations are controlled, we would have substantially stronger evidence that the EVO is associated with a real magnetic phenomenon.
    
    This is why I think birefringence should be treated as a diagnostic rather than proof. Combined with direct magnetic measurements, it could help determine whether the proposed collective spin state of an EVO has a measurable magnetic effect on the surrounding region.

  • Brokeeper

    Dear Andrea,

    I have been trying to understand some of the responses provided lately:
    1. You mentioned “IF we will confirm the SSM”, it would be possible to power electric
    motors like those powering electric trains.
    2. Then you said it would be theoretically possible to power land vehicles only in collaboration
    with the manufacturer of the vehicles.

    It was previously revealed: “The Ecat will have to be put indoor, seat with the top and the bottom in correct position, upon a flat and horizontal basement, with no tilts and/or vibrations”.

    Have the tilt and vibration limitations been overcome, or will that have to be resolved by the vehicle manufacturers? If resolved that is an amazing advancement since the Latina test.

    With much respect,
    Brokeeper

  • Andrea Rossi

    Greg:
    Thank you for your kins support and for the link, although the Rcat does no more belong to the LENR family, albeit I conserve much respect for them,
    Warm Regards,
    A.R.

  • Greg

    LENR comment

    https://x.com/drxwilhelm/status/2101076413210107989/video/1?s=46

    I’m pretty sure he’s talking about old friend Dennis Bushnell at Langley who was a big believer in Andrea Rossi’s work – NASA Langley scientists verified it.

    I’m not aware of a way to blow up a city with cold fusion, but that doesn’t mean it doesn’t exist.

    Humanity IS ready for E-Cat!!

    I’ve always felt the opposition to your work was primarily based on its disruptive potential – especially as it relates to the petro dollar.

  • Andrea Rossi

    Anonymous:
    B.S.: a bunch of rats trying to flat down the Mount Everest with their bytes ( or bits ? )
    Warm Regards,
    A.R.

  • Andrea Rossi

    Svein:
    1. yes
    2. information about the prices will be disclosed at the presentation,
    Warm Regards,
    A.R.

  • Svein

    Dear Andrea,

    I am not quite finished with my questions regarding Sigma 5.
    I fully understand that you do not want to disclose the algorithm you have developed.
    However, since you have now stated that the non-SSM is ready for the Global Presentation, I would like to ask two questions:

    1. Sigma 5

    Does this mean that the simpler version of the ZIAE core used in the non-SSM has already reached Sigma 5?
    I would appreciate confirmation of this, if you can provide it.

    2. Price difference between non-SSM and SSM

    Since simpler solutions are normally less complex and less costly than more complex ones, are there plans to offer the non-SSM at a lower price than the SSM?
    This would seem to be a natural consequence of the lower complexity, if the production cost is correspondingly lower.

    Warm Regards Svein

  • Anonymous

    Dr Rossi,
    The tam-tam against you is trying to disparage the work you are doing with the Ecat: aren’t you worried ?

  • Andrea Rossi

    Paul Dodgshun:
    Thank you for the information
    Warm Regards,
    A.R.

  • Andrea Rossi

    Axil:
    Thank you,
    Warm Regards,
    A.R.

  • Axil

    A ZAEI statement that will be added to the Vacuum Reaction paper revision based on the AI CLAUDE’S recommendation as follows:
    
    Zitterbewegung-Like Dynamics as a Possible Driver of Dynamical Casimir Effects in an EVO
    
    A useful addition to the Vacuum Reaction model concerns Zitterbewegung-like (ZB-like) dynamics in a proposed polariton condensate.
    
    Zitterbewegung-like behavior is known in engineered BEC and polariton systems and results from coherent coupled-state dynamics. Therefore, if an EVO contains a coherent polariton condensate, ZB-like oscillation could provide an experimentally testable dynamical feature of that state.
    
    Importantly, vibration by itself would not prove Zitterbewegung, a BEC, or an EVO. Identification would require the observed frequency, polarization/spin behavior, dispersion, and phase relationships to agree with an appropriate ZB model.
    
    Possible connection to the Dynamical Casimir Effect (DCE)
    
    If a polariton condensate undergoes coherent oscillation, that motion could periodically change its optical properties, such as effective refractive index, dielectric response, polarization, or light-matter coupling.
    
    In plain-text mathematical notation:
    
    q(t) = q0 + delta-q * cos(Omega_ZB * t)
    
    where q could represent:
    
    q = n_eff, epsilon_eff, coupling g, polarization P, etc.
    
    If these changes are sufficiently rapid, the electromagnetic modes associated with the condensate become time dependent. Established dynamical-Casimir/parametric physics then provides a possible conventional mechanism for producing real photons through Bogoliubov mode mixing.
    
    The proposed sequence is:
    
    Polariton BEC*
    -> ZB-like coherent oscillation*
    -> periodic change of optical/EM properties
    -> time-dependent electromagnetic mode structure
    -> Bogoliubov/parametric mode mixing
    -> possible real photon production
    
    The asterisks indicate steps that remain proposed for the EVO rather than experimentally established properties of an EVO.
    
    A particularly interesting condition would occur near parametric resonance:
    
    Omega_ZB ~ 2 * omega_C
    
    where Omega_ZB is the condensate’s oscillation frequency and omega_C is a relevant electromagnetic-mode frequency.
    
    For parametric photon-pair production, a more general relationship would be:
    
    omega_1 + omega_2 ~ Omega_ZB
    
    Thus the radiation provides a direct experimental test. Instead of merely asking whether an EVO emits unusual radiation, one could measure the EVO oscillation frequency and simultaneously measure the radiation spectrum.
    
    If the process is genuinely parametric/DCE-like, one should search for photon pairs satisfying:
    
    omega_1 + omega_2 ~ Omega_ZB
    
    together with the photon-pair correlations or squeezing characteristic of parametric production.
    
    Proposed experimental gate: G_ZB-DCE
    
    Measure the candidate EVO oscillation frequency, Omega_ZB.
    Determine whether the oscillation is associated with polarization, refractive-index, dielectric, or coupling modulation.
    Measure the emitted radiation spectrum simultaneously.
    Test whether omega_1 + omega_2 ~ Omega_ZB.
    Search for correlated/squeezed photon pairs.
    Compare the observations against ordinary dipole/multipole radiation from an oscillating charge or polarization distribution.
    
    Important evidence firewall
    
    Observed vibration -> DOES NOT by itself establish Zitterbewegung.
    
    Zitterbewegung -> DOES NOT by itself establish a polariton BEC.
    
    Zitterbewegung or DCE-like photon production -> DOES NOT establish extraction of energy from the vacuum.
    
    Under conventional dynamical-Casimir/parametric physics, the energy of the generated photons is supplied by the physical process producing the modulation. Therefore the conventional energy ledger remains:
    
    energy lost by pump/condensate = emitted radiation energy + other transferred energy + losses
    
    A Vacuum Reaction energy contribution would require a reproducible residual after the pump, condensate, stored electromagnetic energy, and other conventional energy sources had been quantitatively accounted for.
    
    Relation to Unruh radiation
    
    Unruh radiation should not be required for this mechanism. Applying the ordinary Unruh-temperature equation directly to the acceleration of an oscillating condensate would require a properly defined accelerated detector and quantum field. That correspondence has not been demonstrated for an EVO.
    
    The Dynamical Casimir route is therefore the stronger connection:
    
    coherent polariton condensate*
    -> ZB-like dynamics*
    -> time-dependent dispersion/optical properties
    -> parametric/Bogoliubov mode mixing
    -> correlated photon production?
    
    Implication for the Vacuum Reaction
    
    Zitterbewegung does not establish that the vacuum has been modified. Its significance is more specific: it provides a possible physical mechanism by which a coherent polariton condensate could dynamically modulate its electromagnetic mode environment.
    
    This supplies a testable intermediate mechanism between the proposed condensate and the DVI/DCE portion of the Vacuum Reaction framework without requiring new physics at that intermediate step.
    
    The remaining Vacuum Reaction question is separate:
    
    Does this dynamically modified electromagnetic state merely redistribute pump/condensate energy according to established parametric physics, or is there experimentally reproducible evidence for an additional energy contribution after the conventional energy ledger has been closed?

  • paul dodgshun

    @ 2026-09-23 10:28 Yury E.

    A byproduct of producing hydrogen by electrolysis of water is oxygen: 2H2O => 2H2 + O2
    so two volumes of hydrogen for one volume of oxygen at matching pressure and temperature.

    If you allow electrolysis at high pressure, then you would need to keep an exact matching pressure of oxygen and carefully prevent excursions into the explosive regime caused by gas leakage across the electrolysis chamber[1:]. It is a very dangerous thing to do. I witnessed the after effects of high pressure air and a compressor lubricating oil explosion. Two sailors died and a panel on the ship’s hull plating was blown out.

    [1:] https://pubs.rsc.org/cp/article-abstract/20/23/15746/597858/Explosion-limits-of-hydrogen-oxygen-mixtures-from?redirectedFrom=fulltext

  • Andrea Rossi

    Yury E.:
    Thank you for the suggestion, but I don’t see the sense of this application: the SSM (IF…), makes already electricity ready to be sent to a load, with a COP = x/0 with x>0; why couple it with a device that has <

  • Yury E.

    Dear Dr. Rossi!

    There is another way to operate an ECat in SSM mode. This involves producing hydrogen using an electrolyzer powered by the ECat’s electricity.

    In this case, the quality requirements for the electricity generated by the ECat can be minimal (output voltage instability, surges, fluctuations, etc.). An unstable voltage of 1.5 – 5 V is sufficient.

    The hydrogen produced by the electrolyzer is stored in a high-pressure cylinder. This method does not require a compressor, as the hydrogen pressure can reach high values ​​during electrolysis.

    Next, the hydrogen is converted into electricity of virtually any power using a fuel cell. This technology is standard and well-developed.

    The efficiency of this conversion is 60-80%. Since the hydrogen fuel cell and electrolyzer are mutually reversible devices, a single combined fuel cell is sufficient.

    Sincerely,
    Yury

  • Andrea Rossi

    Svein:
    Thank youfor your AI reference,
    Warm Regards,
    A.R.

  • Svein

    Dear Andrea,

    I realized that it was not appropriate to compare the Ecat with batteries, which are essentially energy storage devices.

    I have therefore asked AI to compare the Ecat with the same amount of electricity produced by coal power, one of the most widely used non-weather-dependent forms of conventional power generation.

    I have also included the environmental disadvantage of the coal alternative by adding an illustrative cost for capturing and permanently storing the corresponding CO₂ through CCS, a technology that is now being implemented in real industrial projects.

    My calculations are based on the Ecat SSM, which I hope will reach the market within the coming months, and on the currently assumed performance and capacity figures for the SSM. These figures are, of course, subject to independent verification.

    Here is the result:

    3 kW Ecat — 100,000 operating hours
    Continuous output: 3 kW
    Operating period: 100,000 hours = 11.4 years
    Total electricity produced: 300,000 kWh
    Assumed Ecat cost: $4,000/kW
    Ecat purchase cost: $12,000
    Assigned energy-security/resilience value: $1,000/kW
    Security value: −$3,000
    Net Ecat cost after security value: $9,000

    For my own household, which currently consumes approximately 30,000 kWh per year, the 11.4-year period corresponds to approximately 342,000 kWh of household electricity consumption — before adding any electricity consumption for an electric car.

    My house is currently heated primarily by an air-to-water heat pump. When outdoor temperatures fall below approximately −5°C, I supplement the heating with wood burning in the fireplace, as the heat pump’s efficiency and heating capacity decrease at low outdoor temperatures, while the electricity demand of my house is increasing.

    Thus, 300,000 kWh from a 3 kW Ecat would cover most of my present household electricity consumption over the full 11.4-year operating period.

    Alternative — same 300,000 kWh from coal power
    Electricity required: 300,000 kWh
    Assumed electricity cost: $0.30/kWh
    Electricity cost: $90,000
    Estimated coal requirement: ~110–120 tonnes
    Estimated emissions: ~250 tonnes CO₂e
    Illustrative CCS cost: ~$30,000
    Total alternative cost: ~$120,000
    Net economic benefit

    $120,000 − $9,000 = ~$111,000 Spread over 11.4 years: ~$9,700 per year or approximately: ~$810 per month:

    Potential additional grid benefit
    I have not assigned a dollar value to the possible grid benefits.
    A distributed Ecat operating where electricity is consumed could potentially reduce:

    electricity transported through the grid
    transmission and distribution losses
    loading of transformers and cables
    local bottlenecks
    the need for some future grid reinforcement.

    These potential benefits would therefore come in addition to the $111,000 calculated above.

    The calculation has been performed using established reference data from published energy and CCS sources, together with the explicit Ecat assumptions stated above. The Ecat-specific assumptions remain subject to independent verification.

    There is also a broader perspective that I find particularly interesting.

    By becoming a user who is also a producer of energy, I would not only be looking after my own household economy and energy security. I would also become a small part of a potentially much larger solution — contributing to the reduction of dependence on centralized generation, reducing the amount of electricity that needs to pass through the grid, and potentially reducing some of the environmental and infrastructure challenges associated with conventional power generation.

    In other words:
    The energy user becomes the producer.
    And the producer can become part of the solution to some of today’s major energy and infrastructure challenges.

    The purpose of the calculation is simply to compare the economic and environmental implications of producing the same 300,000 kWh by two fundamentally different methods.

    Warm Regards Svein

  • Andrea Rossi

    Svein:
    It is a combination of the factors you cited along an algorythm we made,
    Warm Regards,
    A.R.

  • Svein

    Dear Andrea,

    You have explained that Sigma 5 is a rigorous probabilistic calculation of the possibility of error.

    Could you explain, in general terms, how you statistically determine that the SSM core has reached Sigma 5?

    For example, is the Sigma 5 result calculated from the number of tested cores, the accumulated operating time, the number of observed errors, or a combination of these factors?

    I am not asking for any restricted information about the testing procedure, only how the statistical basis for reaching the Sigma 5 level is established.

    Warm Regards Svein

  • Andrea Rossi

    Arnab Saha:
    As soon as we reach the Sigma 5 level, which we still didn’t, therefore I am not able so far to give you a date,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Svein:
    Of course yes,
    Warm Regards,
    A.R.

  • Svein

    Dear Andrea,

    If the SSM version may not yet be ready for the Global Presentation, I assume that you will continue your efforts to achieve SSM and present it later?

    Warm Regards Svein

  • Arnab Saha

    When we can get to know that SSM is coming or not ?
    In which month ?
    Arnab Saha

  • Andrea Rossi

    DrLG:
    No,
    Warm Regards,
    A.R.

Leave a Reply

You can use these HTML tags

<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>