United States Patent US 9,115,913 B1

 

uspto_seal_big

 

Sigillo

 

Alloro del brevetto

.

Read the whole US Patent
Download the ZIP file of US Patent

 

30,515 comments to United States Patent US 9,115,913 B1

  • Andrea Rossi

    Ron Stringer:
    Any buyer can become a reseller getting the 10%
    Warm Regards,
    A.R.

  • Andrea Rossi

    Ken Kocher:
    yes, several months
    Warm Regards,
    A.R.

  • Andrea Rossi

    Pol Dekyvere:
    1- no
    2- no
    Thank you for your kind support,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Gerard McEk:
    No
    Warm Regards,
    A.R.

  • Andrea Rossi

    Prof:
    Thank you for the update,
    Warm Regards,
    A.R.

  • Prof

    Dear Dr Rossi,
    today your paper
    http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
    has reached 63000 readings…and counting
    Prof

  • Gerard McEk

    Dear Andrea,
    Would you consider a pre-demonstration just for resellers in advance of the presentation?
    If so, when could that take place?
    Thanks, kind regards, Gerard

  • Pol Dekyvere

    Dear Andrea,
    I am very enthusiastic about your most wonderful and very useful invention.

    Please may I ask you to answer this two questions:

    1. Does SKLed stand for SKLight emetting Device instead of SKLight emitting Diode? So there is no Light emitting Diode in the SKLed? In this case, the light from the plasma is directed directly to the lens.

    2. Can the light from the SKLed be converted to heat by shining the light on a black body radiator?

    Thank you very much. I wish you every success in the further development of the ecatSKL and, above all, good health.

  • ken kocher

    Dear Dr. Rossi,
    IF you get your 1,000,000 pre-orders, how long do you anticipate, after November, it will take to deliver those orders? 1?2? 3 months?

    Yours,
    kenko1

  • Ron Stringer

    In your response to Gerard McEck, you say “it would be beautiful if all the buyers of the SKLed become sellers of the SKLed earning 10% for every Skled they sell.”
    How do you see this working? Do you think current buyers should become resellers, marking up resales by 10%? Or do you foresee some other arrangement?
    You keep managing to surprise me.
    Ron Stringer

  • Andrea Rossi

    Frank Acland:
    Yes, sorry, my mistake not to inform our Readers yet: the date of the presentation has been anticipated to November 25th upon request of the CEO of the Swedish company in whose facility the presentation will be made, because he wants to be present and the 25th is better for him. Obviously for us is very important his presence and we followed suit.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Nils Fryklund:
    We are working also on the SKL,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Engineer01:
    We are continuing to develope the SKL,
    Warm regards,
    A.R.

  • Andrea Rossi

    Mark U:
    I forwarded also your comment to our webmaster,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Tom Conover:
    True !
    Warm Regards,
    A.R.

  • Andrea Rossi

    Don Zucchiatti:
    1- the Ecat SKLed can be used for public illumination
    2- not an issue
    3- not an issue
    Warm regards,
    A.R.

  • Frank Acland

    Dear Andrea,

    In your reply to Rinus you mentioned November 25th as the presentation date. You have previously announced November 30th. Is the 25th now the confirmed date?

    Many thanks,

    Frank Acland

  • Andrea Rossi

    Patrick:
    I forwarded this comment of yours to our webmaster,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Gerard McEk:
    1- yes
    2- yes
    3- no
    4- advanced
    5- no
    6- yes
    7- yes
    8- it would be beautiful if all the buyers of the SKLed become sellers of the SKLed earning 10% for every Skled they sell
    Warm Regards,
    A.R.

  • Andrea Rossi

    Svein H. Vormedal:
    Thank you for your suggestion,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Steven N. Karels:
    1- confidential
    2- I think Purchasers will be absolutely not interested to this question, unless they are competitors fishing for information.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Rinus:
    1- yes, after the presentation of November 25th
    2- same as in 1
    3- yes
    Warm Regards,
    A.R.

  • Dear Andrea,

    I assume that you want to achieve the desired number of pre-orders as quickly as possible.
    I assume that your industrial partner also want this.
    1. is there an advertisement strategy planned for other sites than the presents?
    2. will there be more informative pictures, like working leds in the dark, showing its capabilities?
    3. is it thinkable that when you have a better insight in the demand, you start production before the magic number of orders is reached?

    Thanks for the information,

    Rinus

  • Steven N. Karels

    Dear Andrea Rossi,

    On your new product, the E-Cat SKLed, Question:

    1. Does the E-Cat SKLed contain an LED or LED array?
    2. If not, would not the name E-Cat SKLed be misleading to the purchaser?

  • Svein H. Vormedal

    Dear Andrea.
    If an arrangement that the LEd-part of SKLed is disconnected and then connected to a separate power supply can not be carried out,
    several different brands of Led lamps can be arranged that provide identical light amount as E-Cat SKLed and easily measure their energy consumption which is then compared with E-Cat SKLed.
    This will show the savings.
    Regards,
    Svein H. Vormedal

  • Gerard McEk

    Dear Andrea,
    Your unexpected switch to introduce a new light source has surprised many of us some weeks ago. We were all in the expectation that you were testing and developing the electricity producing Ecat SKL and preparing the production for an energy source that could safe the world.
    I know you were very enthousiast about the QX some years ago and especially the light it produced. It must have taken quite a while to develop the SKLed from it and maybe you use still components of the QX.
    1. Have you all the time been developing this SKLed in silence since you discovered the QX?
    2. Was it always your aim to develop the light emitting Ecat, since the QX?
    3. Does your step to start producing in due time the SKLed delay development and production of the Ecat SKL?
    4. Can you tell us wat the status is of the Ecat SKL?
    5. Do you expect that the pre-orders of the SKLed will reach the quantity of 1M before the presentation?
    6. Will you and your industrial Partner both invest in the production of the SKLed?
    7. Will you and your Partner jointly develop the Ecat SKL to a practical device?
    8. Can we do anything to help you speeding up the developments and/or pre-sales?
    Great success!
    Kind regards, Gerard

  • Patrick

    Dear Andrea,
    I also did not get the automatic email after I submitted the online form. I tried twice with no result. Kindly check with your IT department.
    Regards
    Patrick

  • Don Zucchiatti

    Dear Andrea
    When I first hear of the Ecat SKLed, I immediately thought the best use would be for municipal street lights. I imagine New York City could use 1 million lights, and once this gets widely accepted I imagine every municipality on the planet would want to switch over to your product. There seems to be very little emphasis in this area, so if may ask a few questions

    1. Would it be an issue to have a unit cover the area like a street
    light or is your light more directed like a spot light?
    2. Would it be an issue to make a unit that could be swapped out as
    easily as a light bulb?
    3. In northern communities would it be an issue to have
    temperatures of 40 below F?

    Thank you for your consideration;

    Don

  • Tom Conover

    Dear Andrea,

    Regarding light without heat, “Fireflies produce light without heat by a chemiluminescent reaction. Chemiluminescent reactions that occur in living organisms are called bioluminescent reactions.”

    Hoped you would enjoy this quote. We have fireflies during the summer and it is very impressive.

    Warm regards,

    Tom

  • Mark U

    Dear Andre,
    Like Art, I too filled in the form on the website (ordering 3 SKLeds) but have not received a confirmation email. (I checked my spam folder as well.)
    Also, when I go to http://www.leonardocorporation.com
    it immediately redirects me to ecat.com, which is where I filled in the online form originally.
    I shall take it on faith that my original order has been received, despite not receiving a confirmation email.

  • Engineer01

    Dr. Rossi,
    Are your Partner(s) independently researching a product beyond the E-Cat SKLed?

  • Nils Fryklund

    Dear Andrea!
    What is going on with E-catSKL to the industry, when all your time
    goes to E-catSKLed?
    Best regards
    Nils Fryklund

  • Andrea Rossi

    Art B:
    Please resend your order going here:
    http://www.leonardocorporation.com
    Fill up the form , click send and you will receive the receipt.
    Anyway, the order you already sent has been received, even if from
    info@leonardocorp1996.com
    during the first 3 days the receipts have not been sent: but we received all the orders from the forms we sent, do not worry.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Ken Bowers:
    Thank you for your insight,
    Warm Regards,
    A.R.

  • Dr Rossi:
    I want to comment on the phenomena which issues from your light which I will name “RossiLight.”

    There is no such thing as light that does not make heat. If “RossiLight” does not do so, it is not ordinary light, but something new. Your discovery of Rossilight, if verified, is of huge importance. Since RossiLight has a new and untested source, it may well be a new phenomena.

    Please test Rossilight to determine whether:
    it travels at speed “C”,
    to determine whether it can be used to pump a laser,
    to find whether it reflects off a mirror surface with the angle of incidence equal to the angle of reflection.
    If it does not heat a surface, does it cool that surface?
    If a beam of Rossilight passes through a beam of ordinary Light, do they annihilate?
    Does a beam of RossiLight interact with magnetic, electrodynamic, or gravitational fields? Does RossiLight make diffraction patterns with itself or with ordinary light?

    Regards, Ken Bowers
    KBowersJr@cox.net
    April 5, 2021

  • Art B

    Dear Dr. Rossi,
    I completed the form on your website to order 10pcs. But did not receive confirmation of the order. Is the confirmation sent out later to my email address, which is the same as the one attached to this post? Sorry to bother you with such a small thing.

  • Andrea Rossi

    Anonymous:
    No
    Warm Regards,
    A.R.

  • Iggy Dalrymple

    Dear Dr Rossi,
    In the event that you quickly receive 1,000,000 pre-orders, could you initiate mass production of SKLed BEFORE end of November, 2021?
    Best Regards,
    Iggy

  • Anonymous

    Dr Rossi,
    Can you explain how the Ecat SKLed of which we watched the photo is done inside and exactly how it works ?

  • Andrea Rossi

    Rod Walton:
    Thanks for the update,
    Warm regards,
    A.R.

  • Rod Walton

    On Power Engineering April 6 2021:
    Gas-fired capacity growing on South East US, Mexico, Thailand
    Rod Walton

  • Andrea Rossi

    Salvatore Boi:
    I prefer not to answer,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Svein H. Vormedal:
    It is not possible,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Svein H. Vormedal,
    Thank you for your suggestion,
    Warm regards,
    A.R.

  • Svein H. Vormedal

    Dear Andrea.
    Since your Led light source is based on 12 volts, the easiest way to demonstrate the effect in E-cat SK is to connect this same light source to another 12 volt energy source and then measure the Amper consumption to achieve the same amount of light.
    If the Amp consumption there is higher than 0.33 Amp, it shows that the E-Cat SK delivers energy.
    (12V x 0.33A = 4W)
    How much larger Ampere consumption becomes shows the gain of the E-Cat SK.
    Regards,
    Svein H. vormedal

  • Salvatore Boi

    Just a thought, since a commercial LED that emits 10,000 lumens costs at least much more than the whole E-CAT SKled, this leads me to consider that in the E-CAT SKled there is no real LED as we know it. but a way to use the light emitted directly by the plasma inside the device, improved and modified by the lens. May be?

  • Andrea Rossi

    Patrick:
    Thank you for the link,
    Warm Regards,
    A.R.
    P.S.:
    Your comment is the No. 56000 of this blog.

  • Andrea Rossi

    Steven N. Karels:
    Good question.
    It does include the dissipated heat, the electric energy consumed net of the dissipation is about 1 Wh/h
    Warm Regards,
    A.R.

  • Andrea Rossi

    Salvatore Boi:
    1- not so far, but could be an idea
    2- yes
    3- < 1s 4- yes 5- obviously the loss of guarantee does not involve the support ! Warm Regards, A.R.

  • Salvatore Boi

    I have some questions to ask:

    1. Could the light beam be adjusted by changing the focus with the ring (screw?) that surrounds the lens?

    2. Could the E-CAT SKled be turned on and off by a twilight switch or a passive infra red (PIR) sensor?

    3. Also, how long does it take from power supply to light output of at least 1000 lumens?

    4. Is it possible to regulate the luminous power emitted, perhaps dimming it?

    5. The request made by others regarding the non-loss of guarantee in case of removal of the C-shaped support, makes sense considering a ceiling with plasterboard in which a round hole of the same diameter as that of the E-CAT SKled can be drilled, which if I’m not mistaken it should be 100mm, all in order to make the volume of the E-CAT SKled disappear inside the gap between the ceiling and the plasterboard. In this case the C-bracket would be wider than the hole. Do you agree now?

    Thank you in advance for the kind answers that are useful to all.

Leave a Reply

You can use these HTML tags

<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>