United States Patent US 9,115,913 B1

Read the whole US Patent
Download the ZIP file of US Patent

36,430 comments to United States Patent US 9,115,913 B1

  • Levin E. Iniur

    Dear Eng. Rossi,
    in addition to US dollars, please allow the purchase in Bitcoin. You will see how you will exceed in a very short time the quantity required to start the production.
    Best regards.

  • Andrea Rossi

    Prof:
    Thank you for the update,
    Warm Regards,
    A.R.

  • Prof

    Dear Dr Rossi,
    I read today on
    http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
    Total readings: 98000
    and counting…
    Ad majora,
    Prof

  • Andrea Rossi

    Hermann Goggles:
    We prefer to avoid “tricks”: in this period we have a balance between the orders that we cancel after vetting the financial capacity of the Clients who made mammoth pre-orders and the new orders arriving, so we do not have substantial progress, albeit we do not have a decrease either.
    Warm Regards,
    A.R.

  • Hermann Goggles

    Dear Andrea Rossi,

    Why the count of pre-orders isn’t shown or disclosed anywhere? It’s actually a good marketing trick to use the “only this and this amount to fulfill the thing”.

  • Andrea Rossi

    Johnny:
    Theoretically yes, but the SKLep has a different configuration, to generate directly electricity,
    Warm Regards,
    A.R.

  • Johnny

    Dr Rossi,
    In the paper
    http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
    in the pragraph 6 is reported the experimental setup description and results. Is that experimental setup the same of the Ecat SKLep ?
    Best,
    Johnny

  • Andrea Rossi

    To Thomas Flores and All our Christian Readers:
    We wish you all a blessed Holy Week and a Happy Easter, hoping the discussions on course will make Peace between Russia and Ukraine,
    Andrea Rossi with the Team of Leonardo Corporation

  • Andrea Rossi

    Jean Pierre:
    As soon as possible
    Warm Regards
    A.R.

  • Andrea Rossi

    Darko:
    Thank you for your suggestion
    Warm Regards
    A.R.

  • Darko

    Dear Dr. Rossi,
    You should not worry about orders. As you once said, nobody wants to be the first, but everybody wants to be the second. After you deliver the first SKLeps, the customers will show them to their friends and relatives, and you will receive new orders. The more SKLeps you deliver, the more new orders you will receive.
    Best regards,
    Darko

  • Jean Pierre

    Hi, Andrea. A question if I may.

    When the Ecat/AI combination is powered up using a 12 Volt battery so that it will run in permanent SSM when the battery is disconnected, how does one turn it off?

    Warmest regards and hoping for the success of the new 1kW unit.
    Jean Pierre

  • I wish you a very wonderful Holy-week, and the most blessed of all Easter!

  • Andrea Rossi

    Prof:
    Thank you for the update
    Warm Regards
    A.R.

  • Prof

    Dear Dr Rossi,
    Here are the stats I read today on your profile in
    http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
    Readings 106000 ( of which 96800 only of “Ecat SK and long range particle interactions “
    Recommendations 7196
    Citations + Mentions 53
    Total Research Interest index 1834
    And counting …
    Best
    Prof

  • Andrea Rossi

    Vincenzo Bonomo:
    Thank you for your empathy
    Warm Regards
    A.R.

  • Andrea Rossi

    Gregory Daigle:
    No
    Warm Regards
    A.R.

  • Andrea Rossi

    Daniel G. Zavala:
    We received pre-orders from all the Continents
    Thank you for your support
    Warm Regards
    A.R.

  • Andrea Rossi

    Rainer R.:
    Thank you for your suggestion
    Warm Regards
    A.R.

  • Rainer R.

    Dear Mr. Rossi,
    please be not distracted by these many redundant questions about the 1 KW ecat module. You have already answered someone that it will be available just in 2023.
    Do rather make more videos, like one with a 100W light bulb, to accelerate the orders. Or let it do by one of your staff.
    We need the 1 million orders more than ever.
    Please, use your limited time to canvass your product.
    Best regards
    Rainer R.

  • Dear Dr. Rossi,

    Have the orders you have received for the E-Cat SKLep been from across the world?
    Or are there still countries with large populations such as India, China, Australia, etc. that appear to be unaware of your product offering? If, “Yes”, if you can list them, we can help spread the word by social media.

    Eagerly waiting my orders to be fulfilled.

    Best Regards,

    Daniel G. Zavela

  • Dr. Rossi,

    Earth Day, April 22, is approaching.
    Will you be making any public announcements or marketing “teasers” in anticipation of that day?

    Warm regards,
    Greg

  • Vincenzo Bonomo

    Caro Dr. Rossi, mi permetto di integrare la Sua risposta ad Acland sulle motivazioni profonde che La sostengono in questo Suo percorso scientifico/imprenditoriale.
    Secondo me al primo posto c’è il bisogno di rimarginare quello sfregio ingiusto che le è stato inferto molti anni fa dalle autorità italiane per le note vicende che l’hanno riguardata, vicende che tuttora Le danno la forza per affrontare le mille difficoltà di questa avventura incredibile che è l’E-cat.
    Cordiali Saluti

    Vincenzo Bonomo

  • Jitse

    Dear bloggers and readers,

    If you get about 2300 kWh per year with 10 zone panels, you get about 8760 kWh with 10 Sklep’s, that is about 3.5 x as much energy.
    I choose 1 Kwh EcatSKLep that is 3.5 x as cheap. Costs are 1/2 less than for panels.

    The energy is neatly distributed over the day/year. I would prefer a link via an inverter with the network (grid) as a buffer, because I do not trust batteries in my house, these are expensive and possibly also a fire hazard.

    If you need more to become completely CO2 free (so no more natural gas), that is the solution for the coming years.

    With regards Jitse

  • Andrea Rossi

    Wilfred Babelotzky:
    As I said IF the 1 kW module will be born all the Ecats will combine and 1 kW unit will equal 10
    Warm Regards
    A.R.

  • Wilfried Babelotzky

    Dear Andrea,

    in my opinion, you are currently behaving awkwardly with the 1 kW SKL. If people believe that they can get the SKL 1 kW promptly, they will cancel the 100 W variants or convert to 1 kW versions at the same cost. This way, you will only get to 1,000,000 units for the start of production much later. Maybe you won’t even get to 1,000,000 because trust has been gambled away and there will be another postponement. Please make absolutely sure that the SKL 1 kW does not delay the delivery/production start.
    It would be extremely cool if you could simply replace the 100 W with the 1 kW at the same unit price. That would be really unbeatable low energy cost, even after conversion to ac power.

    Best regards
    Wilfried

    Translated with http://www.DeepL.com/Translator (free version)

  • Andrea Rossi

    DrLG:
    We need to reach the target
    Warm Regards
    A.R.

  • Andrea Rossi

    Tom Conover:
    Thank you for your suggestion
    Warm Regards
    A.R.

  • Tom Conover

    Dear Andrea,

    I am thinking that you may have converted your product line to the 1kW Ecat SKLep. This would be of benefit to your sales and to your customers, in my opinion. I will hopefully be able to change my orders to the 1kW Ecat SKLep when you succeed with completing this project. Perhaps the SK(100w)Lep will servive, but certainly the the SK(1kW)Lep will outsell or go neck to neck with the 100w device. With 4 units of the 1kWLep I might be able to power my home.

    Is my logic reasonable?

    Warm regards,

    Tom

  • DrLG

    Dear Dr. Rossi

    Follow-up question to the posts shown below.

    If possible can you give us a time estimate for this new announcement, or at least indicate if the announcement will be before reaching 1000000 pre-order target?

    Best Regards
    LarryG

    ========
    DrLG:
    I referred to number 2,
    Warm Regards,
    A.R.
    ===========
    When you wrote “We are working to make possible what you are asking for” were you referring to Alessandro Coppi’s comment:

    1) ” would be enough to give confidence in the future, stabilize energy and food prices.”

    or to the comment:
    2) “now is the time to make an official announcement to the world”
    =======================================

  • Andrea Rossi

    Mimmo Canino:
    I am not able to answer,
    Warm Regards,
    A.R.

  • mimmo canino

    Dear Andrea,
    what do you think of the rumors that say that zero point energy is already in the knowledge an use of the most advanced governments, of the military systems, and that they already sell it to us produced in hidden power plants, in the general electricity grid, without saying where it comes from? Nobody knows where the electricity it consumes is produced, the electricity grid is multinational, so in Sweden you can use the electricity from the hydroelectric plants of Calabria, as well as in Piedmont and Spain you can use the electricity from the French nuclear plants…
    zero point regards

  • Andrea Rossi

    Nanni Gori:
    Ioy won the bet,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Stephen:
    Thank you for your attention to our work,
    Warm Regards,
    A.R.

  • Stephen

    Dear Andrea

    Thanks for your reply. It is definitely worth re reading the paper
    http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
    I was a while agi that I last re read it. But this morning I have taken time to read it again
    There is definitely a lot of insights in it, that I would say become more apparent the more you learn understand about the topics it covers. I was quietly surprised how much is spreading in there that we discuss outside sometimes .

    Honestly it is really worth the re reading.

    Best Regards

    Stephen.

  • Nanni Gori

    Dr Rossi,
    I bet in this very moment you are working on the 1 kW prototype of the Ecat SKLep.
    Best,
    Nanni

  • Andrea Rossi

    Frank Acland:
    b) is correct,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Stephen:
    2 is closer.
    See also par 2,3,4,5 in
    http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
    Warm Regards,
    A.R.

  • Andrea Rossi

    DrLG:
    I referred to number 2,
    Warm Regards,
    A.R.

  • DrLG

    Dear Dr. Rossi

    Can you please clarify your response to Alessandro Coppi.

    When you wrote “We are working to make possible what you are asking for” were you referring to Alessandro Coppi’s comment:

    1) ” would be enough to give confidence in the future, stabilize energy and food prices.”

    or to the comment:
    2) “now is the time to make an official announcement to the world”

    Best Regards
    LarryG

  • Stephen

    Dear Andrea

    When you mention electrons phase change do mean:

    1. A change in state analogous to solid to liquid or liquid to gas?

    2. A shift in phase of the matter waves due to the interaction with the quantum potential enabled by the Aharanov Bohm effect. The brings the phase into coherence?

    I suppose if 2 is the correct one 1 is also somehow relevant as the matter is a new coherent state.

    Thanks and Best Regards

    Stephen.

  • Frank Acland

    Dear Andrea,

    Here is a question posted on E-Cat World today that I thought I would pass along to you:

    “Question: Is Rossi’s primary strategic motive
    a) to make lots of money or
    b) to ensure that the distribution of the technology is not suppressed or delayed.”

    Or maybe there is a different possible answer.

    Thank you if you can answer,

    Frank Acland

  • Andrea Rossi

    Mats Heijkenskjold:
    Premature: we will give the final data sheet when we will start the deliveries,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Alessandro Coppi:
    Thank you for your attention to the work of our Team.
    We are working to make possible what you are asking for.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Stenen Nicholes Karels:
    Thank you for sharing your experiment,
    Warm Regards,
    A.R.

  • Steven Nicholes Karels

    Dear Andrea Rossi,

    I built a Prototype to accept three SKLep units, running in series, and interfaced to an Enphase IQ7A micro-inverter.

    Because I do not have the three SKLep unit, in place of the SKLep units, I used three 120VAC input, 12VDC, 120W power supplies tied in series to produce a nominal 36VDC, 360W power which goes to the micro-inverter.

    I then fed grid power (240VAC power from my house) to the Micro-Inverter and it converted the nominal 360W of DC power to 341.5W of grid power, as shown on a power meter.

    When I receive the SKLep units and a Controller unit, I will replace the three power supply units with the SKLep units (plus add a small 120VAC to 12VDC @ 10W power supply to fed the SKLep units.) It should then come up and work as I have previously validated the prototype circuitry.

    I anticipate building 10 of these electrical systems, each with three SKLep units, and installing them in parallel on the rafters in my garage. Combined, these would produce about 3 kW of electrical power. During one 24-hour day, the units would generate about 72 kW-hrs of energy.

    When I look at my electricity usage history, my daily consumption is about 40 kW-hrs.

  • Alessandro Coppi

    Hi Andrea,
    if, as we all believe, you have the invention of the millennium up and running, now is the time to make an official announcement to the world.
    You would be remembered as the man who in the worst possible moment for mankind, saved the world from war and famine.
    In fact, it does not matter if it will take years or decades to spread the technology, the only announcement made in a credible way, would be enough to give confidence in the future, stabilize energy and food prices.
    Call an event right away and reveal the e-cat SK Lep to the world, or give a mandate to whoever can do it, now or never.

    Sorry for the imperative
    Alessandro Coppi

  • Mats Heijkenskjold

    Dear Andrea Rossi,

    You answered Steven N Karels: “The mounting holes will be provided with inserts”.
    Could you give some more details, like how many, diameter, if threaded, thread size?

    Best regards

    Mats Heijkenskjold

  • Andrea Rossi

    Steven N. Karels:
    The mounting holes will be provided with inserts,
    Warm Regards,
    A.R.

  • Steven Nicholes Karels

    Dear Andrea Rossi,

    I do not believe, to date, you have described the mounting methods for the SKLep, 100W units. Will mounting holes (threaded or with inserts be provided, or will instructions be made as to where to drill and insert such inserts?

Leave a Reply

You can use these HTML tags

<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>