United States Patent US 9,115,913 B1

Read the whole US Patent
Download the ZIP file of US Patent

39,789 comments to United States Patent US 9,115,913 B1

  • Prof

    Dr Rossi,
    Here are the stats on Researchgte of the paper
    http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
    Total readings: 116 000 ( more than the 99% of 15 millions publications on Researchgate )
    And counting…
    Best
    Prof

  • Christine

    Dr Rossi,
    The live streaming of the Ecat SKLep SSM is history. Beyond every possible doubt we can see infinite energy from the Zero Point Energy. As well explained in the link of the weight measurement put under the video, a battery with the same weight would get exhausted in a couple of days.
    You made a masterpiece.
    Christine

  • Andrea Rossi

    Robert Maxwell:
    We did not notice it,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Pekka Janhunen:
    Message passed to the IT guy
    Warm Regards,
    A.R.

  • Andrea Rossi

    Gavonoo Mamia:
    Well, the time shown in the watch changes along the reality…maybe the idea to put a watch with the seconds is good.
    Thank you for the suggestion,
    Warm Regards,
    A.R.

  • Gavino Mamia

    Dr. Rossi
    in the previous ecat live there was a power supply that occasionally flashed, now in this live the image is perfectly static, it almost looks like a photo, wouldn’t it be better to use a clock with seconds or add a small fan or something like that does it move?

  • Dear Andrea,
    It seems to me that two links on ecatthenewfire.com site point to the wrong file.
    On page https://ecatthenewfire.com/pre-order-the-ecat-minisklep-10-w/ , “Full data sheet” still points to https://ecatthenewfire.com/wp-content/uploads/2022/11/SKLep-DataSheet-Nov1-2022.pdf which is the old non-SSM datasheet, while I think it should point to the new SSM datasheet https://ecatthenewfire.com/wp-content/uploads/2023/02/SKLep-SSM-DataSheet-Febr13-2023.pdf . The same thing on page https://ecatthenewfire.com/pre-order-the-ecat-sklep/ .
    regards, /pekka

  • Robert Maxwell

    HI Dr Rossi
    At 12:41AM last night it looked to me like the bulb in the lamp was not on.
    Can you confirm if there was problem?

    Peace and Blessings to you and your team.

  • Andrea Rossi

    Willi Meinders:
    First of all, let me say that the Ecat SKLep SSM is not related to LENR: please see
    http://www.researchgate.net/publication/330601653_E-Cat_SK_and_long_range_particle_interactions
    Whereas it is true that I started my work based on the LENR, eventually I changed idea, for many reasons that would be too long to explain here and now.
    About the issue regarding the start of the deliveries, we are working very hard on it,.
    I wish you success for your good job, that I deeply respect.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Johann Schmid:
    Please see my answers below,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Domenico Canino:
    I am not able to answer,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Gian:
    God bless you from all our Team,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Rick 57:
    Sorry, this information is confidential,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Heinz Sause:
    Never mind. Whatever the luninosity, W luminosity/W Consume = X/0, with x>0
    Warm Regards,
    A.R.

  • Andrea Rossi

    Pi:
    Thank you for your suggestions and support,
    Warm Regards,
    A.R.

  • Andrea Rossi

    WaltC:
    We ultraconservatively consider 1 W the luminosity; whatever the real value, with the SSM W out/W in = infinite, whatever the value of W out,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Koen Vandewalle:
    Thank you for your insight; we strongly appreciate your congratulations,
    Warm Regards,
    A.R.

  • Koen Vandewalle

    There are many military and economic wars going on in the world right now.

    I fear that the free market and democracy are a few orders of magnitude subordinate to the interests that really rule.

    When I think about how much violence is used, we can be thankful that Andrea Rossi can keep working for so long.

    Twelve years ago, after the first public presentation of the E-Cat, I thought the world and humanity would be ready to appreciate this inexhaustible energy source.

    I can’t believe that there are still not (ten) millions of these devices ordered. It is almost inevitable that this invention will be thwarted by great means. The sabotage is likely to be carried out with greater resources than what will be available in the foreseeable time to achieve commercialization.

    I am happy to see that a technical, eco-modern future is possible, but at the same time I am more gloomy than ever about the way things are going.

    Nevertheless, a big congratulations to Andrea Rossi and his team for the start of the streaming that shows us the light.

    Koen

  • WaltC

    Dr Rossi,
    Congratulations for the SSM device and a livestream that can only become more and more amazing as duration increases.

    Question– can you characterize what the volts, amps, and/or watts are that the SSM is currently generating?

    Best Wishes,
    WaltC

  • Pi

    Dear Andrea,

    Just watched the live streaming of the SSM Sklep.
    To me it absolutely convincing! You and your team have done a fantastic job.

    But I’ve always wondered one thing. Considering the difficulties of reaching the necessary amount of pre-orders, did you consider to build a small pilot plant and selling the electricity to a local provider? Let’s say 10Kw. Investment around 25K. In case, it would be easily financed by a bank and it would pays for itself.
    This approach would preserve the intellectual property, and would be the definitive answer to the skeptics, being able to show the bills and payments of the electricity provider (of course live streaming here too 🙂 )
    You make small money and huge adv.
    (Sorry if someone else made the same proposal and you answered already).

    Congratulazioni e i migliori auguri per il successo del progetto!

    Piergiorgio

  • Heinz Sause

    hello dr Rossi !
    First of all my thanks and admiration.
    I tried to find an LED spotlight of the type on the net.
    I didn’t succeed.
    Can you help me to find one like that ?
    This should also be of interest to many others to dispel doubts about their invented way of generating electricity.
    Best wishes to you and your team,
    Heinz Sause

  • Rick 57

    Dear Andrea,

    congratulations for the successful SSM streaming.

    On the datasheet you mention expressly Lithium and Nichel.

    Can you briefly explain what is the role of these two elements in the extraction of the Energy from the ZPE? Plasma generation, maybe?

    Best Regards,

    Riccardo

  • Caro Andrea,
    hai mantenuto la tua promessa.
    Seguiremo con interesse e
    un poco di ansia tutta l’evoluzione che seguirĂ .
    Laureato in filosofia, oltre un decennio di studio, di continua sperimentazione, una tenacia granitica ed ora un successo inimmaginabile.
    Che Iddio ti aiuti nell’interesse di tutta L’UmanitĂ .
    Con tutto il cuore.
    Gian

  • domenico canino

    Dear Andrea,
    i saw the livestreaming.
    Seems to me that the more the invention is important and relevant, the more minimalist is your presentation.
    Why did you choose low profile for such an invention?

  • Johann Schmid

    Dear Dr. Rossi,
    thank you for the livestream of the ecat SSM-version.
    Could you please also mentioned which ecat SSM, 10W or 100W? and the lamp/consumer, how many Watt?
    Best regards
    J.Schmid

  • Dear Andrea Rossi,
    I have been working on our topic for several years now. I run a blog, I have written a book, I give interviews and I give lectures. All to advance the cold nuclear reaction. I continue to do this with full commitment, but due to my age (77) there are of course limits to this at some point. Very few of my listeners or readers have ever followed the “Rossi Blog”, nor do they know the long history of Ecat’s development. They always just ask: When will the device be available for purchase? That is why it is so important to provide more and more hard facts. The patent and the Lugano Report are hard facts. The upcoming video will certainly be very helpful for the pre-orders. But a video remains a video. Important to know now is: What is the status of the pre-orders and what development is foreseeable.
    Willi Meinders, coldreaction.net

  • Andrea Rossi

    Dear Readers:
    The live streaming of the Ecat SKLep SSM -self sustained mode- has been started today exactly at 8 AM Miami time,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Patrick:
    The max power depends on the number of units assembled, we will make up to 1 MW. We will show it when we will have one made. I do not know now when it will be possible.
    Warm Regards,
    A.R.

  • Andrea Rossi

    Maozhijie,
    Thank you for your support.
    The streaming will start in about 53 minutes,
    Warm Regards,
    A.R.

  • Maozhijie

    Dear Dr Rossi:
    Waitting for the streaming of the Ecat SKLep SSM tomorrow, Best wishes for you and your team.

    Maozhijie

  • Patrick

    Dear Andrea,

    Thank you for your answer. The math you give is obvious, but the max power is important to be known with confidence so that they buyer knowns how many units are required for the specific use case, and how cost effective it is.

    I hope that with the live steam you can provide good confidence of the max output power, so that we can reach the million orders. Will you show evidence of the max output power?

    Best regards,
    Patrick

  • Andrea Rossi

    Patrick:
    Whatever the power shown, the cop is x/0, where x>0
    The fact that you can connect in series and parallels the units of Ecat SKLep to reach any power you need is obvious.
    Warm Regards,
    A.R.

  • Patrick

    Dear Andrea,

    We’re all very eager to see the live stream of the SSM.
    One question, if I may:

    How can potential buyers get confidence from watching the livestream, that the e-cat can supply up to 10W of power to the load?

    Best regards,
    Patrick

  • Andrea Rossi

    Daniel G. Zavela:
    Thank you for your suggestion,
    Warm Regards,
    A.R.

  • Dear Dr. Rossi,

    Have you discussed with your investors the option of putting the e-cat on Amazon.com for preorder?

    How Amazon pre-orders work
    When you pre-order a not-yet-released item on Amazon, you will not be charged immediately — instead, the card on file will be charged a few days before the item is released, typically when it ships or a few days prior to its shipping, depending on the item.

    Best of luck with the marketing and advertising of the e-cat.

    Best Regards,

    Daniel G. Zavela

  • Andrea Rossi

    Julian:
    Thank you for your support
    Warm Regards
    A.R.

  • Julian

    Dear Andrea
    Good luck for the historical introduction of the Ecat SSM tomorrow !
    Cheers
    Julian

  • Andrea Rossi

    Mike:
    Thank you for your kind support,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Roberto:
    Thank you for your kind support,
    Warm Regards,
    A.R.

  • Andrea Rossi

    Mats Heijkenskjold,
    Theoretically it is possible, but remember that this kind of connections must be made only by certified contractors, for safety reasons.
    High voltage is dangerous and can be deadly if improperly installed.
    Warm Regards,
    A.R.

  • Mats Heijkenskjold

    Dear Andrea,

    Is it possible to have 500 V in serie with the SKLep SSM? The inverter I will use have a max. effiency at about 500V.
    Or what is the max. voltage possible in a serie coupling?

    Best regards and good luck with the streaming,

    Mats Heijkenskjold

  • Roberto

    Dr Rossi,
    I saw that the streaming of the Ecat SKLep has been turned off, in preparation of the streaming of the SSM that will start on Monday March 13.
    Good luck for this momentous achievement !
    Best
    Roberto

  • Mike

    Dear Dr Andrea Rossi,
    I wish you and your team success for the historical live streaming of the Ecat SKLep SSM,
    Cheers,
    Mike

  • Silent Majority Guy

    @Readers of the JoNP,
    We must help to make viral the streaming of the SSM, by means of lips service to friends and acquaintances.
    Silent Majority Guy

  • Andrea Rossi

    Manuel Cilia:
    Sure: the installation of generators At high voltage must be made by certified contractors.
    Warm Regards
    A.R.

  • Dear Dr Rossi
    I am not sure how to make sure that people realise that when the Ecat units are wired in series they can reach dangerous voltages that can kill people. Of course, the single units will be fine but I believe that you will need to make sure people understand these facts and that only qualified people should be installing the higher voltage units.
    I know that the last thing you would want is people hurting themselves due to a lack of knowledge.
    I already have my area setup for the first test units, things are getting exciting.

  • Italo R.

    In a world where energy had become an increasingly precious and expensive resource, the generator with infinite COP had represented an unprecedented revolution. Thanks to this device, energy could be produced practically at zero cost, solving the world’s energy and pollution problems.

    The generator had been invented by an engineer named Andrea, who had used small amounts of rare earths to build it. Initially, his device had been met with skepticism, but when news spread that it could produce virtually unlimited energy, things had quickly changed.

    In no time, the generator had become one of the most sought-after products in the world, and Andrea had become an international hero. Countries around the world had begun investing in the production of these devices, and zero-cost energy had spread everywhere.

    But there was a problem: the need to use rare earths. The demand for these elements had exploded, and there was not enough supply to meet the demand. Prices had skyrocketed, and the cost of rare earths had begun to pose a problem for the production of generators.

    The international competition to obtain rare earths had begun to generate tensions and conflicts between various states, especially with China, which held a monopoly on them. Many countries had started to try to develop alternative technologies to replace Andrea’s generator, but so far no one had found a solution.

    The situation had become critical, and world leaders had gathered to find a solution to the problem. Andrea had attended the meeting as an expert, but he too knew the situation was complicated. In the end, a temporary solution was found: to increase rare earth production through more effective recycling and extraction techniques.

    But Andrea knew this was not a long-term solution. Humanity would have to find a new source of energy, one that did not depend on limited resources like rare earths. And he had decided it was time to return to the lab to find that solution. He didn’t know if he would succeed, but he knew he had to try. For the good of the whole world.

    Written by ChatGPT

  • Andrea Rossi

    CC:
    The IT guy is doing it,
    Warm Regards,
    A.R.
    P.S.
    He did it right now

  • CC

    Hi Andrea:
    I read on your last comment here that the streaming of the Ecat SKLep has been suspended to prepare the video of the SSM, that will start next Monday, which is good, but perhaps is better to write this message also in the void window that now appears instead of the streaming,
    Best
    CC

  • Andrea Rossi

    DEAR READERS:
    IN THIS MOMENT WE HAVE STOPPED THE STREAMING OF THE ECAT SKLEP, TO PREPARE THE INSTALLATION OF THE ECAT SKLEP SSM.
    THE STREAMING WILL BE RESTARTED ON MONDAY MARCH 13th AT 08:00 A.M. MIAMI TIME WITH THE ECAT SKLEP SSM
    Warm Regards,
    A.R.

Leave a Reply

You can use these HTML tags

<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>